Code :

Code: A0-01
Description: PCU PWB ROM error
Causes: The firmware version-up is not completed properly by interruption of the power during the version-up operation, etc. PCU PWB trouble.
Remedy: Use SIM49-1 to perform the firmware version-up procedure again. Replace the PCU PWB.

Code: A0-02
Description: SCN Mother PWB ROM error
Causes: The firmware version-up is not completed properly by interruption of the power during the version-up operation, etc. SCN Mother PWB trouble.
Remedy: Use SIM49-1 to perform the firmware version-up procedure again. Replace the SCN Mother PWB.

Code: A0-04
Description: ACU ROM error
Causes: ACU ROM data error An error occurs during firmware upgrading for some reasons.
Remedy: Perform firmware upgrading again.

Code: A0-10
Description: Controller ROM error
Causes: The content of the color profile is abnormal. Combination error between the MFPC PWB firmware and the color profile
Remedy: Upgrade the firmware collectively. Replace the MFPC PWB.

Code: A0-17
Description: Inconsistency between the UI data and the CPU firmware version
Causes: Combination error between the UI contents data and the CPU UI firmware version.
Remedy: Install the firmware in the all-firmware version-up mode.

Code: A0-18
Description: Incompatible ASIC-MAIN firmware
Causes: Combination version error in MFP ASIC
Remedy: Check the combination of the firmware. Use Sim49-1 to perform the firmware version up

Code: A0-19
Description: MFPC starting (synchronization) error Starting error caused by defective MFP PWB
Causes: Defective of Flash ROM, memory devices
Remedy: Insert and extract mSATA SSD Insert and extract ASIC1 Flash ROM (ASIC-PG1) Insert and extract ASIC2 Flash ROM (ASIC-PG2) Check and replace the following parts individually. If still the same remained, replace parts will be returned to the old one each time. Replace mSATA SSD Replace ASIC1 Flash ROM (ASIC-PG1) Replace ASIC2 Flash ROM (ASIC-PG2) Replace MFP PWB

1 2 3 4 > Last ›