Description: Identification error Model error Type error Destination error Data abnormality Misc error (Identification error) When the CRUM trademark differs. When the CRUM company code differs. (Model error) When the boot program model code does not match with the CRUM model information (Type error) When the CRUM type is other than [Genuine/Conversion/Production rotation] (Destination error) The destination of the body differs from that of the CRUM (Data abnormality) The initial check information includes an erroneous value. When the max. toner supply time is 00. When the print hard stop is 00
Causes: CRUM chip failure. Erroneous TNCA.
Remedy: Replace the CRUM chip. Replace the TNCA.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.