Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MXM623 — Trang 10/22

Code: F1-46

Description: Saddle motor trouble
Causes: Saddle motor trouble. Finisher control PWB trouble. Home position sensor trouble. Harness and connector connection trouble.
Remedy: Use SIM3-3 to check the operation of the saddle motor. Replace the saddle motor (FSDM). Replace the finisher control PWB. Replace the home position sensor. Check connection of the harness and the connector.

Code: F1-50

Description: Main unit - Finisher combination error
Causes: The finisher which is not supported by the main unit model is installed. Finisher control PWB trouble.
Remedy: Install a proper finisher. Replace the finisher control PWB.

Code: F1-51

Description: Saddle sensor connection trouble
Causes: Finisher control PWB trouble. Home position sensor trouble. Harness and connector connection trouble.
Remedy: Use SIM3-2 to check the operation of the guide home position sensor and the saddle plate position sensor. Replace the finisher control PWB. Check connection of the harness and the connector.

Code: F1-52

Description: Finisher micro switch trouble
Causes: Finisher control PWB trouble. Each micro switch trouble. Harness and connector connection trouble.
Remedy: Use SIM3-2 to check the operation of the safety switch 1 and the delivery roller lift down sensor. Replace the finisher control PWB. Check connection of the harness and the connector.

Code: F1-60

Description: Finisher - Inserter communication trouble
Causes: Connector and harness connection trouble. Finisher control PWB trouble.
Remedy: Check connection of the connector and the harness. Turn OFF/ON the power. Replace the finisher control PWB.

Code: F1-61

Description: Inserter EEPROM trouble
Causes: EEPROM trouble. Inserter PWB EEPROM access circuit trouble.
Remedy: Check the installing state of the EEPROM. Replace the inserter control PWB.

Code: F1-62

Description: Inserter reverse sensor trouble
Causes: Sensor breakage. Harness disconnection. Inserter PWB trouble.
Remedy: Use SIM3-2 to check the operation of the sensor. Replace the inserter control PWB.

Code: F1-80

Description: Finisher power cooling fan motor trouble
Causes: Power cooling fan motor trouble. Finisher control PWB trouble. Harness and connector connection trouble.
Remedy: Replace the power cooling fan motor. Replace the finisher control PWB. Check connection of the harness and the connector.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie