Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MXM654N — Trang 22/31

Code: F8-30

Description: FAX microprocessor access error(3rd line)
Causes: FAX 1-chip microprocessor access error (Read and write)
Remedy: Case 1 Cause Program writing trouble to the 1-chip microprocessor, or no program data written. Check and Remedy Use SIM66-42 to rewrite the 1-chip microprocessor program. Case 2 Cause FAX 1-chip microprocessor circuit trouble. Check and Remedy Replace the FAX control PWB.

Code: F8-97

Description: Incompatibility between FAX control and main machine(3rd line)
Causes: The FAX control PWB installed is improper. FAX control PWB trouble.
Remedy: Install a proper FAX control PWB. Replace the FAX control PWB.

Code: F8-98

Description: Incompatible destination between FAX control and main machine(3rd line)
Causes: Incompatibility between the destination information written into the FAX control PWB EEPROM and that in the main machine (set with SIM26-6)
Remedy: 1) Check the destination of the FAX control PWB. 2) Check the destination of the machine. (SIM26-6)

Code: H2-00

Description: Thermistor open trouble (TH_UM_AD2)
Causes: Thermistor trouble PCU PWB trouble Thermistor connector and harness connection trouble Fusing section connector connection trouble Fusing unit not installed
Remedy: Use SIM44-14 to check the state of the thermistor. Replace the thermistor. Replace the PCU PWB. Check connection of the thermistor connector and the harness. Check the connector in the fusing section.

Code: H2-02

Description: Thermistor open trouble TH_US
Causes: Thermistor trouble Control PWB trouble Fusing section connector connection trouble AC power trouble Fusing unit not installed.
Remedy: Check connection of the harness and the connector from the thermistor to the control PWB.

Code: H2-03

Description: Thermistor open trouble TH_UM_AD1
Causes: Thermistor trouble Control PWB trouble Fusing section connector connection trouble AC power trouble Fusing unit not installed.
Remedy: Check connection of the harness and the connector from the thermistor to the control PWB.

Code: H2-05

Description: Non-contact upper sub thermistor open
Causes: Thermistor trouble Control PWB trouble Fusing section connector connection trouble AC power trouble Fusing unit not installed.
Remedy: Check connection of the harness and the connector from the thermistor to the control PWB.

Code: H2-06

Description: Contact upper sub thermistor open
Causes: Thermistor trouble Control PWB trouble Fusing section connector connection trouble AC power trouble Fusing unit not installed.
Remedy: Check connection of the harness and the connector from the thermistor to the control PWB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie