Remedy: Are the harness(es) between the PLG board and the galvanomirror, PLG board and laser drive board, and PLG board and HSYNC board broken, and connector(s) disconnected? Yes Replace the harness(es), and re-connect the connector(s). No • Replace the PLG board. • Replace the unit.
Remedy: Are the harness(es) between the PLG board and the galvanomirror, PLG board and laser drive board, and PLG board and HSYNC board broken, and connector(s) disconnected? Yes Replace the harness(es), and re-connect the connector(s). No • Replace the PLG board. • Replace the unit.
Remedy: Are the harness(es) between the PLG board and the galvanomirror, PLG board and laser drive board, and PLG board and HSYNC board broken, and connector(s) disconnected? Yes Replace the harness(es), and re-connect the connector(s). No • Replace the PLG board. • Replace the unit.
Description: Image data transmission error from SYS board
Remedy: Is the harness between the PLG board and the SYS board broken, and connector disconnected? Yes Replace the harness, and re-connect the connector. No • Replace the PLG board. • Replace the SYS board.
Description: Secondary scanning fine adjustment error
Remedy: Are the harness(es) between the PLG board and the galvanomirror, PLG board and laser drive board, and PLG board and HSYNC board broken, and connector(s) disconnected? Yes Replace the harness(es), and re-connect the connector(s). No • Replace the PLG board. • Replace the unit.
Remedy: Are the harness(es) between the PLG board and the galvanomirror, PLG board and laser drive board, and PLG board and HSYNC board broken, and connector(s) disconnected? Yes Replace the harness(es), and re-connect the connector(s). No • Replace the PLG board. • Replace the unit.
Remedy: Are the harness(es) between the PLG board and the galvanomirror, PLG board and laser drive board, and PLG board and HSYNC board broken, and connector(s) disconnected? Yes Replace the harness(es), and re-connect the connector(s). No • Replace the PLG board. • Replace the unit.
Description: Primary scanning tap adjustment error
Remedy: Are the harness(es) between the PLG board and the galvanomirror, PLG board and laser drive board, and PLG board and HSYNC board broken, and connector(s) disconnected? Yes Replace the harness(es), and re-connect the connector(s). No • Replace the PLG board. • Replace the unit.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.