Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 18 — Trang 3/3

Code: E12

Description: Bypass misfeeding (Paper not reaching the registration sensor): The paper fed from the bypass tray does not reach the registration sensor.
Remedy: Check item: Side cover Remove the paper if there is any paper in front of the registration sensor. Registration sensor • Sensor check • Connector check (J526, J532, and J533) • Harness check Bypass pickup solenoid • Check if the solenoid is working. • Connector check (J526, J532, and J533) • Harness check Bypass paper sensor • Sensor check • Connector check (J526, J532, and J533) • Harness check MAIN board • Board check • Connector check (CN26-A) • Harness check
Parts to be replaced: Registration sensor Bypass pickup solenoid Bypass pickup roller Replace it if it is worn out. Bypass paper sensor MAIN board

Code: E13

Description: Drawer misfeeding (Paper not reaching the registration sensor): The paper fed from the drawer does not reach the registration sensor.
Remedy: Check item: Side cover Remove the paper if there is any paper in front of the registration sensor. Registration sensor • Sensor check • Connector check (J526, J532, and J533) • Harness check Pickup solenoid • Check if the solenoid is working. • Connector check (J526, J532, and J533) • Harness check MAIN board • Board check • Connector check (CN26-A) • Harness check
Parts to be replaced: Registration sensor Pickup solenoid Pickup roller Replace it if it is worn out. MAIN board

Code: E40

Description: Right side cover open jam: The right side cover has opened during printing.
Remedy: Check item: Right side cover Remove the paper if there is any paper, and then close the cover. Right side cover opening/closing switch • Connector check (J515) • Harness check Power supply unit Check the connector for 24 V power supply. MAIN board • Board check • Connector check (CN31) • Harness check
Parts to be replaced: Right side cover opening/closing switch MAIN board

Code: E41

Description: Front cover open jam: The front cover has opened during printing.
Remedy: Check item: Front cover Close the cover. Front cover opening/closing switch • Connector check (J515) • Harness check Power supply unit Check the connector for 24 V power supply. MAIN board • Board check • Connector check (CN31) • Harness check
Parts to be replaced: Front cover opening/closing switch MAIN board

Code: F07

Description: Engine connection abnormality
Remedy: (1) Check the version of the system firmware. (2) Check the version of the engine firmware. (3) Initialize the value of adjustment/setting mode codes by executing setting mode code 655. (4) Replace the MAIN board.

Code: F09

Description: EEPROM error
Remedy: (1) Replace the EEPROM. (2) Replace the MAIN board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie