Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 2000AC — Trang 15/29

Code: E030

Description: Other paper jam Paper Jam in Printer - Please Clear Paper Path. Power-ON jam
Causes: Sensor in the jamming area Refer to the table below. LGC board
Remedy: Sensor in the jamming area • Sensor check (Refer to the table below) • Connector check • Harness check LGC board • Board check • Connector check • Harness check

Code: E061

Description: Other paper jam Paper Jam in Printer - Please Clear Paper Path. Incorrect paper size setting for the 1st drawer jam
Causes:
Remedy: If any paper remains in the equipment or drawer, remove it. Match the paper size of the drawer setting and the one in the drawer. * Paper size detection is performed at the first sheet of paper when the drawer is opened or closed, or when the power of the equipment is turned ON.

Code: E062

Description: Other paper jam Paper Jam in Printer - Please Clear Paper Path. Incorrect paper size setting for the 2nd drawer jam
Causes:
Remedy: If any paper remains in the equipment or drawer, remove it. Match the paper size of the drawer setting and the one in the drawer. * Paper size detection is performed at the first sheet of paper when the drawer is opened or closed, or when the power of the equipment is turned ON.

Code: E063

Description: Other paper jam Paper Jam in Printer - Please Clear Paper Path. Incorrect paper size setting for the PFP upper drawer jam
Causes:
Remedy: If any paper remains in the equipment or drawer, remove it. Match the paper size of the drawer setting and the one in the drawer. * Paper size detection is performed at the first sheet of paper when the drawer is opened or closed, or when the power of the equipment is turned ON.

Code: E064

Description: Other paper jam Paper Jam in Printer - Please Clear Paper Path. Incorrect paper size setting for the PFP lower drawer.
Causes:
Remedy: If any paper remains in the equipment or drawer, remove it. Match the paper size of the drawer setting and the one in the drawer. * Paper size detection is performed at the first sheet of paper when the drawer is opened or closed, or when the power of the equipment is turned ON.

Code: E065

Description: Other paper jam Paper Jam in Printer - Please Clear Paper Path. Incorrect paper size setting for the bypass tray jam
Causes:
Remedy: If any paper remains in the equipment or drawer, remove it. Match the paper size of the drawer setting and the one in the drawer. * Paper size detection is performed at the first sheet of paper when the drawer is opened or closed, or when the power of the equipment is turned ON.

Code: E090

Description: Other paper jam Paper Jam in Printer - Please Clear Paper Path. Image data delay jam
Causes: SYS board LGC board HDD Page memory
Remedy: Paper path • Remove the paper remained in front of the registration sensor) Power • Check if the error is cleared by turning the power OFF and then back ON. SYS board • Connector check (SYS board - LGC board) • Board check HDD • Connector check • HDD check Page memory • Check if the page memory is correctly connected to the connector on the SYS board.

Code: E091

Description: Other paper jam Paper Jam in Printer - Please Clear Paper Path. Motor-ON timeout jam
Causes: SYS board LGC board HDD
Remedy: Paper path • Check if there is any paper in the equipment. Remove it if there is. • If the error still occurs, check the following. Power Check if the error is cleared by turning the power OFF and then back ON. SYS board • Connector check (SYS board - LGC board) • Board check LGC board • Connector check • Board check HDD • Connector check • HDD check
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie