• Code: E0A0
• Description: Other paper jam Paper Jam in Finisher - Please Clear Paper Path. Image transport ready time-out jam
• Causes: LGC board SYS board Flat cable
• Remedy: LGC board • Flat cable check (SYS board - LGC board) • Connector check (CN371) • Board check SYS board • Flat cable check (SYS board - LGC board) • Connector check (CN133) • Board check

• Code: E110
• Description: Paper misfeeding Paper Insertion Jam - Please Clear Paper Path. Paper misfeeding in the ADU (paper not reaching the registration sensor)
• Causes: Registration sensor CFD board LGC board Rollers in the ADU Clean or replace it.
• Remedy: Paper stop jam at the registration roller position Registration guide Check the registration guide. Replace it if needed. All Registration sensor • Sensor check (Perform the input check: FS-03- [ALL]OFF/[9]/[A]) • Connector check (CN404) • Harness check CFD board • Board check • Connector check (CN404, CN408) • Harness check LGC board • Board check • Connector check (CN369) • Harness check ADU Check if the connector between the ADU and equipment is connected.

• Code: E120
• Description: Paper misfeeding Paper Insertion Jam - Please Clear Paper Path. Paper misfeeding in the bypass tray (paper not reaching the bypass feed sensor)
• Causes: Bypass feed clutch Feed sensor CFD board
• Remedy: Bypass feed clutch • Clutch check (Perform the output check: FS-03-204) • Connector check (J819, CN403) • Harness check Feed sensor • Sensor check (Perform the input check: FS-03-[ALL]OFF/[9]/[B]) • Connector check (J820, CN403) • Harness check CFD board • Board check • Connector check (CN403, CN408) • Harness check LGC board • Board check • Connector check (CN369) • Harness check

• Code: E130
• Description: Paper misfeeding Paper Insertion Jam - Please Clear Paper Path. Paper misfeeding in the 1st drawer (paper not reaching the 1st drawer feed sensor):
• Causes: Feed sensor Feed clutch CFD board LGC board 1st drawer feed roller Replace it if it is worn out. 1st drawer separation pad Replace it if it is worn out. 1st drawer pickup roller Replace it if it is worn out.
• Remedy: 1st drawer (loaded paper amount) When thick paper is used and if it is overloaded, reduce the amount as specified (Stack height 14 mm). Feed clutch • Clutch check (Perform the output check: FS-03-201) • Connector check (J802, CN367) • Harness check Feed sensor • Sensor check (Perform the input check: FS-03-[ALL]OFF/[9]/[B]) • Connector check (CN404, J790) • Harness check CFD board • Board check • Connector check (CN404, CN408) • Harness check LGC board • Board check • Connector check (CN369, CN367) • Harness check

• Code: E140
• Description: Paper misfeeding Paper Insertion Jam - Please Clear Paper Path. Paper misfeeding in the 2nd drawer (paper not reaching the 2nd drawer feed sensor)
• Causes: 2nd drawer feed sensor 2nd drawer feed clutch PFU board 2nd drawer feed roller Replace it if it is worn out. 2nd drawer separation roller Replace it if it is worn out. 2nd drawer pickup roller Replace it if it is worn out.
• Remedy: 2nd drawer feed sensor • Sensor check (Perform the input check: FS-03-[F3]ON/[4]/[D]) • Connector check (CN368, J805, CN920, CN923, CN925, J934, J936) • Harness check 2nd drawer feed clutch • Clutch check (Perform the output check: FS-03-202) • Harness check • Connector check (CN368, J805, CN920, CN923, CN927, J941) PFU board • Board check • Connector check (CN925, CN927) • Harness check

• Code: E150
• Description: Paper misfeeding Paper Insertion Jam - Please Clear Paper Path. Paper misfeeding in the PFP upper drawer (paper not reaching the PFP upper drawer feed sensor)
• Causes: PFP upper drawer feed sensor PFP upper drawer feed clutch PFC board PFP board LGC board PFP upper drawer feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out.
• Remedy: PFP upper drawer feed sensor • Sensor check (Perform the input check: FS-03-[F3]ON/[0]/[C]) • Connector check (CN247, J959, J975) • Harness check PFP upper drawer feed clutch • Clutch check (Perform the output check: FS-03-226) • Connector check (CN246, J960, J963) • Harness check PFU board • Board check • Connector check (CN920, CN923, J805) • Harness check PFP board • Board check • Connector check (J959, CN241, CN246, CN247) • Harness check LGC board • Board check • Connector check (CN368) • Harness check

• Code: E160
• Description: Paper misfeeding Paper Insertion Jam - Please Clear Paper Path. Paper misfeeding in the PFP lower drawer (paper not reaching the PFP lower drawer feed sensor)
• Causes: PFP lower drawer feed sensor PFP lower drawer feed clutch PFU board PFP board LGC board PFP lower drawer feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out.
• Remedy: PFP upper drawer feed sensor • Sensor check (Perform the input check: FS-03-[F3]ON/[0]/[D]) • Connector check (CN247, J959, J976) • Harness check PFP upper drawer feed clutch • Clutch check (Perform the output check: FS-03-228) • Connector check (CN246, J960, J962) • Harness check PFU board • Board check • Connector check (CN920, CN923, J805) • Harness check PFP board • Board check • Connector check (J959, CN241, CN246, CN247) • Harness check LGC board • Board check • Connector check (CN368) • Harness check

• Code: E190
• Description: Paper misfeeding Paper Insertion Jam - Please Clear Paper Path. Paper misfeeding in the LCF (paper not reaching the LCF feed sensor)
• Causes: LCF feed sensor LCF feed clutch PFU board LGC board LCF board LCF feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out.
• Remedy: LCF feed sensor • Sensor check (Perform the input check: FS-03-[F1]ON/[9]/[F]) • Connector check (CN1, CN6, CN349) • Harness check LCF feed clutch • Clutch check (Perform the output check: FS-03-209) • Connector check (CN1, CN5, CN349) • Harness check PFU board • Board check • Connector check (CN920, CN923, J805) • Harness check LGC board • Board check • Connector check (CN368) • Harness check LCF board • Board check • Connector check (CN1, CN6) • Harness check