Code :

Code: E030
Description: Other paper jam Paper Jam in Printer - Please Clear Paper Path. Power-ON jam
Causes: Sensor in the jamming area Refer to the table below. LGC board
Remedy: Sensor in the jamming area • Sensor check (Refer to the table below) • Connector check • Harness check LGC board • Board check • Connector check • Harness check

Code: E061
Description: Other paper jam Paper Jam in Printer - Please Clear Paper Path. Incorrect paper size setting for the 1st drawer jam
Causes:
Remedy: If any paper remains in the equipment or drawer, remove it. Match the paper size of the drawer setting and the one in the drawer. * Paper size detection is performed at the first sheet of paper when the drawer is opened or closed, or when the power of the equipment is turned ON.

Code: E062
Description: Other paper jam Paper Jam in Printer - Please Clear Paper Path. Incorrect paper size setting for the 2nd drawer jam
Causes:
Remedy: If any paper remains in the equipment or drawer, remove it. Match the paper size of the drawer setting and the one in the drawer. * Paper size detection is performed at the first sheet of paper when the drawer is opened or closed, or when the power of the equipment is turned ON.

Code: E063
Description: Other paper jam Paper Jam in Printer - Please Clear Paper Path. Incorrect paper size setting for the PFP upper drawer jam
Causes:
Remedy: If any paper remains in the equipment or drawer, remove it. Match the paper size of the drawer setting and the one in the drawer. * Paper size detection is performed at the first sheet of paper when the drawer is opened or closed, or when the power of the equipment is turned ON.

Code: E064
Description: Other paper jam Paper Jam in Printer - Please Clear Paper Path. Incorrect paper size setting for the PFP lower drawer.
Causes:
Remedy: If any paper remains in the equipment or drawer, remove it. Match the paper size of the drawer setting and the one in the drawer. * Paper size detection is performed at the first sheet of paper when the drawer is opened or closed, or when the power of the equipment is turned ON.

Code: E065
Description: Other paper jam Paper Jam in Printer - Please Clear Paper Path. Incorrect paper size setting for the bypass tray jam
Causes:
Remedy: If any paper remains in the equipment or drawer, remove it. Match the paper size of the drawer setting and the one in the drawer. * Paper size detection is performed at the first sheet of paper when the drawer is opened or closed, or when the power of the equipment is turned ON.

Code: E090
Description: Other paper jam Paper Jam in Printer - Please Clear Paper Path. Image data delay jam
Causes: SYS board LGC board HDD Page memory
Remedy: Paper path • Remove the paper remained in front of the registration sensor) Power • Check if the error is cleared by turning the power OFF and then back ON. SYS board • Connector check (SYS board - LGC board) • Board check HDD • Connector check • HDD check Page memory • Check if the page memory is correctly connected to the connector on the SYS board.

Code: E091
Description: Other paper jam Paper Jam in Printer - Please Clear Paper Path. Motor-ON timeout jam
Causes: SYS board LGC board HDD
Remedy: Paper path • Check if there is any paper in the equipment. Remove it if there is. • If the error still occurs, check the following. Power Check if the error is cleared by turning the power OFF and then back ON. SYS board • Connector check (SYS board - LGC board) • Board check LGC board • Connector check • Board check HDD • Connector check • HDD check