• Code: E270
• Description: Bypass transport jam (Paper not reaching the registration sensor): Paper fed from the bypass tray and passed through the bypass feed sensor does not reach the registration sensor.
• Causes: Registration sensor Lower transport clutch LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
• Remedy: Registration sensor • Sensor check (Perform the input check: 03-[ALL]OFF/[7]/[F]) • Connector check (CN348) • Harness check Lower transport clutches • Clutch check (Perform the output check: 03-229, 231) • Connector check (CN348) • Harness check LGC board • Board check • Connector check (CN348) • Harness check

• Code: E300
• Description: PFP upper drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st drawer feed sensor.
• Causes: Registration sensor Lower transport clutch LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
• Remedy: Registration sensor • Sensor check (Perform the input check: 03-[ALL]OFF/[7]/[F]) • Connector check (CN348) • Harness check Lower transport clutches • Clutch check (Perform the output check: 03-229, 231) • Connector check (CN348) • Harness check LGC board • Board check • Connector check (CN348) • Harness check

• Code: E310
• Description: PFP upper drawer transport jam (Paper not reaching the 1st drawer feed sensor): The paper does not reach the 1st drawer feed sensor after it has passed the 2nd drawer feed sensor.
• Causes: 1st drawer feed sensor Lower transport clutches (high/ low speed) LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out
• Remedy: 1st drawer feed sensor • Sensor check (Perform the input check: 03-[FAX]ON/[1]/[G]) • Connector check (CN337) • Harness check Lower transport clutches (high/ low speed) • Clutch check (Perform the output check: 03-230, 233) • Connector check (CN338) • Harness check LGC board • Board check • Connector check (CN337, CN348) • Harness check

• Code: E320
• Description: PFP upper drawer transport jam (Paper not reaching the 2nd drawer feed sensor): The paper does not reach the 2nd drawer feed sensor after it has passed the PFP upper drawer feed sensor.
• Causes: 2nd drawer feed sensor Lower transport clutches (high/ low speed) PFP transport clutches LGC board PFP board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
• Remedy: 2nd drawer feed sensor • Sensor check (Perform the input check: 03-[FAX]ON/[1]/[F]) • Connector check (CN348) • Harness check Lower transport clutches (high/ low speed) • Clutch check (Perform the output check: 03-230, 233) • Connector check (CN348) • Harness check PFP transport clutch • Clutch check (Perform the output check: 03-225) • Connector check (CN241, CN244, CN349) • Harness check LGC board • Board check • Connector check (CN348, CN349) • Harness check PFP board • Board check • Connector check (CN241, CN244) • Harness check

• Code: E330
• Description: PFP lower drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st drawer feed sensor.
• Causes: Registration sensor Lower transport clutch LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
• Remedy: Registration sensor • Sensor check (Perform the input check: 03-[ALL]OFF/[7]/[F]) • Connector check (CN348) • Harness check Lower transport clutches • Clutch check (Perform the output check: 03-229, 231) • Connector check (CN348) • Harness check LGC board • Board check • Connector check (CN348) • Harness check

• Code: E340
• Description: PFP lower drawer transport jam (Paper not reaching the 1st drawer feed sensor): The paper does not reach the 1st drawer feed sensor after it has passed the 2nd drawer feed sensor.
• Causes: 1st drawer feed sensor Lower transport clutches (high/ low speed) LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out
• Remedy: 1st drawer feed sensor • Sensor check (Perform the input check: 03-[FAX]ON/[1]/[G]) • Connector check (CN337) • Harness check Lower transport clutches (high/ low speed) • Clutch check (Perform the output check: 03-230, 233) • Connector check (CN338) • Harness check LGC board • Board check • Connector check (CN337, CN348) • Harness check

• Code: E350
• Description: PFP lower drawer transport jam (Paper not reaching the 2nd drawer feed sensor): The paper does not reach the 2nd drawer feed sensor after it has passed the PFP upper drawer feed sensor.
• Causes: 2nd drawer feed sensor Lower transport clutches (high/ low speed) PFP transport clutches LGC board PFP board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
• Remedy: 2nd drawer feed sensor • Sensor check (Perform the input check: 03-[FAX]ON/[1]/[F]) • Connector check (CN348) • Harness check Lower transport clutches (high/ low speed) • Clutch check (Perform the output check: 03-230, 233) • Connector check (CN348) • Harness check PFP transport clutch • Clutch check (Perform the output check: 03-225) • Connector check (CN241, CN244, CN349) • Harness check LGC board • Board check • Connector check (CN348, CN349) • Harness check PFP board • Board check • Connector check (CN241, CN244) • Harness check

• Code: E360
• Description: PFP lower drawer transport jam (Paper not reaching the PFP upper drawer feed sensor): The paper does not reach the PFP upper drawer feed sensor after it has passed the PFP lower drawer feed sensor.
• Causes: PFP lower drawer feed sensor PFP transport clutches LGC board PFP board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. PFP transport roller Replace it if it is worn out.
• Remedy: 2nd drawer feed sensor • Sensor check (Perform the input check: 03-[FAX]ON/[1]/[F]) • Connector check (CN348) • Harness check Lower transport clutches (high/ low speed) • Clutch check (Perform the output check: 03-230, 233) • Connector check (CN348) • Harness check PFP transport clutch • Clutch check (Perform the output check: 03-225) • Connector check (CN241, CN244, CN349) • Harness check LGC board • Board check • Connector check (CN349) • Harness check PFP board • Board check • Connector check (CN241, CN244) • Harness check