Code :

Code: 935
Description: 935.10 Printhead sweep error, swept through Hz range without finding the resonant frequency 935.11 Printhead sweep error, autosweep hw state 935.12 Printhead sweep error, coarse sweep state 935.13 Printhead sweep error, init fine sweep state 935.14 Printhead sweep error, fine sweep state 935.15 Printhead sweep error, check prelim amp state 935.16 Printhead sweep error, enable amp Kp state 935.17 Printhead sweep error, amp Kp failed to converge 935.18 Printhead sweep error, enable amp Ki state 935.19 Printhead sweep error, amp Ki failed to converge 935.20 Printhead sweep error, enable offset controller state 935.21 Printhead sweep error, load scan regs state 935.22 Printhead sweep error, fwd and rev capture times differ by too much 935.23 Printhead sweep error, check sweep accuracy state 935.24 Printhead sweep error, reserved 935.25 Printhead sweep error, detected resonant frequency out of expected range 935.26 Printhead sweep error, timed out waiting for end of sweep

Code: 936
Description: 936.01 No lock detected at normal motor start 936.02 No lock detected at motor start for motor ID 936.03 No halls detected at motor start 936.04 Failed to stop within timeout 936.05 Stall detected during speed control

Code: 937
Description: 937.00 Main transport motor lost lock 937.01 Main transport motor lost lock, detected by engine control 937.02 Overspeed detected during position control 937.03 Overspeed detected during speed control

Code: 940
Description: 940.00 LVPS service error 940.01 Line frequency outside allowed range of 45Hz-64Hz 940.02 Line frequency below 43Hz 940.03 No zero cross detected on belt fuser model

< 1 2