Description: Communication error between System-CPUand Scanner-CPU
Causes: SYS board
Remedy: Reproducibility Turn the power OFF and then back ON using the main power switch. SYS board • Check if the conductor pattern on the SYS board is short circuited or open circuited. • Connector check (CN123) • Harness check (CN123)
Remedy: Reproducibility Turn the power OFF and then back ON using the main power switch. SYS board • Check if the conductor pattern on the SYS board is short circuited or open circuited. • Connector check (CN123) • Harness check (CN123)
Description: Database abnormality: Database is not operating normally.
Causes:
Remedy: Setting 1. Check that no jobs remain and rebuild the databases. ([5] + [C] + [POWER] -> 4. Initialize database -> 1. LDAP DB and 2. Log DB (Job,Msg). 2. If the error is not recovered, reinstall the system software. ([4] + [9] + [POWER] -> 4. System Software(HD data)) Notes: • If you rebuild the databases with a job remaining, delete it after finishing. • When "Rebuilding all databases" is performed, all data including log/user/role/group/department information and address book data are deleted. If you back up the data in advance, they will be recovered by restoring them after rebuilding the database.
Description: Database abnormality (user information management database)
Causes:
Remedy: Setting 1. Delete the log in the following procedure:[5] + [C] + [POWER] → 4. Initialize database → 1. LDAP database (to delete user database) (Note that all user, role, group and accounting data will be deleted.) 2. If the error is not recovered, reinstall the system software. ([4] + [9] + [POWER] -> 4. System Software(HD data)) Notes: . If you rebuild the databases with a job remaining, delete it after finishing. . When "Rebuilding all databases" is performed, all data including log/user/role/group/department information and address book data are deleted. If you back up the data in advance, they will be recovered by restoring them after rebuilding the database.
Remedy: Setting 1. Delete the log in the following procedure: [5] + [C] + [POWER] → 4. Initialize database → 2. Log database (jobs and messages) (Note that all job and message logs will be deleted.) 2. If the error is not recovered, reinstall the system software. ([4] + [9] + [POWER] → 4. System Software(HD data)) Notes: . If you rebuild the databases with a job remaining, delete it after finishing. . When "Rebuilding all databases" is performed, all data including log/user/role/group/department information and address book data are deleted. If you back up the data in advance, they will be recovered by restoring them after rebuilding the database.
Description: Database abnormality: Database is not operating normally. (Language management database)
Causes:
Remedy: Setting Delete the journal file: [5] + [C] + [START] ¡÷ 4. Initialize DB ¡÷ 3. Language DB If the recovery is still not completed, reinstall the system software and application program. "11.3.2 Update procedure"
Remedy: Setting Compare the serial number of the equipment with a number displayed with 08-9601. If they are different, enter the correct serial number at 08-9601, 08-9083.
Description: Error due to damage to filtering setting file
Causes: HDD
Remedy: Setting 1. Check the bad sector of the HDD (08-9072). If the result is "NG", replace the HDD. Notes: It may take more than 30 minutes to finish the checking. 2. Perform [3] + [C] + [POWER] → [3], and then reinstall the HDD software. Notes: User data will be deleted when [3] + [C] + [POWER] → [3] is performed.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.