• Code: E140
• Description: 2nd drawer misfeeding (Paper not reaching the 2nd drawer feed sensor): The paper fed from the 2nd drawer does not reach the 2nd drawer feed sensor.
• Causes: 2nd drawer feed sensor DRV board LGC board 2nd drawer feed clutch 2nd drawer feed roller Replace it if it is worn out. 2nd drawer separation roller Replace it if it is worn out. 2nd drawer pickup roller Replace it if it is worn out.
• Remedy: 2nd drawer feed sensor • Sensor check (Perform the input check: 03-[FAX]ON/[4]/[D]) • Connector check (J1085, J1111, CN454) • Harness check 2nd drawer feed clutch • Clutch check (Perform the output check: 03-202) • Harness check • Connector check (J1084, CN453) DRV board • Board check • Connector check (CN462, CN450, CN451) • Harness check LGC board • Board check • Connector check (CN361, CN362) • Harness check

• Code: E150
• Description: PFP upper drawer misfeeding (Paper not reaching the PFP upper drawer feed sensor): The paper fed from the PFP upper drawer does not reach the PFP upper drawer feed sensor.
• Causes: PFP upper drawer feed sensor PFP upper drawer feed clutch LGC board PFP board PFP upper drawer feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out.
• Remedy: PFP upper drawer feed sensor • Sensor check (Perform the input check: 03-[FAX]ON/[0]/[C]) • Connector check (CN247, J959, J975) • Harness check PFP upper drawer feed clutch • Clutch check (Perform the output check: 03-226) • Connector check (CN246, J960, J963) • Harness check LGC board • Board check • Connector check (CN371) • Harness check PFP board • Board check • Connector check (J959, CN241, CN246, CN247) • Harness check

• Code: E160
• Description: PFP lower drawer misfeeding (Paper not reaching the PFP lower drawer feed sensor): The paper fed from the PFP lower drawer does not reach the PFP lower drawer feed sensor.
• Causes: PFP lower drawer feed sensor PFP lower drawer feed clutch LGC board PFP board PFP lower drawer feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out.
• Remedy: PFP upper drawer feed sensor • Sensor check (Perform the input check: 03-[FAX]ON/[0]/[D]) • Connector check (CN247, J959, J976) • Harness check PFP upper drawer feed clutch • Clutch check (Perform the output check: 03-228) • Connector check (CN246, J960, J962) • Harness check LGC board • Board check • Connector check (CN371) • Harness check PFP board • Board check • Connector check (J959, CN241, CN246, CN247) • Harness check

• Code: E190
• Description: LCF misfeeding (Paper not reaching the LCF feed sensor): The paper fed from the LCF does not reach the LCF feed sensor.
• Causes: LCF feed sensor LCF feed clutch LGC board PFP board LCF feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out.
• Remedy: LCF feed sensor • Sensor check (Perform the input check: 03-[COPY]ON/[9]/[F]) • Connector check (CN1, CN6, CN349) • Harness check LCF feed clutch • Clutch check (Perform the output check: 03-209) • Connector check (CN1, CN6, CN349) • Harness check LGC board • Board check • Connector check (CN371) • Harness check PFP board • Board check • Connector check (CN1, CN6) • Harness check

• Code: E200
• Description: 1st drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st drawer feed sensor.
• Causes: Registration sensor 1st drawer feed clutch 2nd drawer feed clutch Bypass feed clutch Transport clutch (H)/(L) DRV board LGC board Feed roller
• Remedy: Registration sensor • Sensor check (Perform the input check: 03-[ALL]OFF/[9]/[A]) • Connector check (CN462, J1114, J1077) • Harness check 1st drawer feed clutch • Clutch check (Perform the output check: 03-201) • Connector check (CN391, J1016) • Harness check 2nd drawer feed clutch • Clutch check (Perform the output check: 03-202) • Connector check (CN453, J1084) • Harness check Bypass feed clutch • Clutch check (Perform the output check: 03-204) • Connector check (CN461, J1109) • Harness check Transport clutch (H) • Clutch check (Perform the output check: 03-230) • Connector check (CN453, J1089) • Harness check Transport clutch (L) • Clutch check (Perform the output check: 03-233) • Connector check (CN453, J1090) • Harness check DRV board • Board check • Connector check (CN462, CN450, CN451) • Harness check LGC board • Board check • Connector check (CN361, CN362) • Harness check

• Code: E210
• Description: 2nd drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st drawer feed sensor.
• Causes: Registration sensor 1st drawer feed clutch 2nd drawer feed clutch Bypass feed clutch Transport clutch (H)/(L) DRV board LGC board Feed roller
• Remedy: Registration sensor • Sensor check (Perform the input check: 03-[ALL]OFF/[9]/[A]) • Connector check (CN462, J1114, J1077) • Harness check 1st drawer feed clutch • Clutch check (Perform the output check: 03-201) • Connector check (CN391, J1016) • Harness check 2nd drawer feed clutch • Clutch check (Perform the output check: 03-202) • Connector check (CN453, J1084) • Harness check Bypass feed clutch • Clutch check (Perform the output check: 03-204) • Connector check (CN461, J1109) • Harness check Transport clutch (H) • Clutch check (Perform the output check: 03-230) • Connector check (CN453, J1089) • Harness check Transport clutch (L) • Clutch check (Perform the output check: 03-233) • Connector check (CN453, J1090) • Harness check DRV board • Board check • Connector check (CN462, CN450, CN451) • Harness check LGC board • Board check • Connector check (CN361, CN362) • Harness check

• Code: E220
• Description: 2nd drawer transport jam (Paper not reaching the 1st drawer feed sensor): The paper does not reach the 1st drawer feed sensor after it has passed the 2nd drawer feed sensor.
• Causes: 1st drawer feed sensor Transport clutches (high speed) Transport clutches (low speed) DRV board LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
• Remedy: Feed sensor • Sensor check (Perform the input check: 03-[ALL]OFF/[9]/[B]) • Connector check (CN462, J1114, J1078) • Harness check Transport clutches (high speed) • Clutch check (Perform the output check: 03-230) • Connector check (CN453, J1089) • Harness check Transport clutches (low speed) • Clutch check (Perform the output check: 03-233) • Connector check (CN453, J1090) • Harness check DRV board • Board check • Connector check (CN453, CN450, CN451) • Harness check LGC board • Board check • Connector check (CN361, CN362) • Harness check

• Code: E270
• Description: Bypass transport jam (Paper not reaching the registration sensor): Paper fed from the bypass tray and passed through the bypass feed sensor does not reach the registration sensor.
• Causes: Registration sensor 1st drawer feed clutch 2nd drawer feed clutch Bypass feed clutch Transport clutch (H)/(L) DRV board LGC board Feed roller
• Remedy: Registration sensor • Sensor check (Perform the input check: 03-[ALL]OFF/[9]/[A]) • Connector check (CN462, J1114, J1077) • Harness check 1st drawer feed clutch • Clutch check (Perform the output check: 03-201) • Connector check (CN391, J1016) • Harness check 2nd drawer feed clutch • Clutch check (Perform the output check: 03-202) • Connector check (CN453, J1084) • Harness check Bypass feed clutch • Clutch check (Perform the output check: 03-204) • Connector check (CN461, J1109) • Harness check Transport clutch (H) • Clutch check (Perform the output check: 03-230) • Connector check (CN453, J1089) • Harness check Transport clutch (L) • Clutch check (Perform the output check: 03-233) • Connector check (CN453, J1090) • Harness check DRV board • Board check • Connector check (CN462, CN450, CN451) • Harness check LGC board • Board check • Connector check (CN361, CN362) • Harness check