Code :

Code: 950.00
Description: NVRAM mismatch
Causes: EPROM mismatch failure
Remedy: This error code indicates a mismatch between the System Board assembly and the interface card assembly. Warning: In the event of replacement of any one of the following components: • Flatbed interconnect card • System board assembly • Interface card assembly Only replace one component at a time. Replace the required component, and perform a POR before replacing a second component listed above. If this procedure is not followed, the printer will be rendered inoperable. Never replace two or more of the components listed above without a POR after installing each one, or the printer will be rendered inoperable. Warning: Never install and remove components listed above as a method of troubleshooting components. Once a component has been installed in a machine, it cannot be used in another machine. It must be returned to the manufacturer.

Code: 951.00
Description:
Causes:
Remedy: Replace the system board. Warning: When replacing any one of the following components: • Flatbed interconnect card • System board assembly • Interface card assembly Only replace one component at a time. Replace the required component, and perform a POR before replacing a second component listed above. If this procedure is not followed, the printer will be rendered inoperable. Never replace two or more of the components listed above without a POR after installing each one, or the printer will be rendered inoperable. Warning: Never install and remove components listed above as a method of troubleshooting components. Once a component has been installed in a printer, it cannot be used in another printer. It must be returned to the manufacturer.

Code: 954.00
Description:
Causes:
Remedy: Replace the interface card. Warning: When replacing any one of the following components: • Flatbed interconnect card • System board assembly • Interface card assembly Only replace one component at a time. Replace the required component, and perform a POR before replacing a second component listed above. If this procedure is not followed, the printer will be rendered inoperable. Never replace two or more of the components listed above without a POR after installing each one, or the printer will be rendered inoperable. Warning: Never install and remove components listed above as a method of troubleshooting components. Once a component has been installed in a printer, it cannot be used in another printer. It must be returned to the manufacturer.

‹ First < 19 20 21 22 23 24 >