Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 5500c — Trang 31/34

Code: SC857

Description: USB I/F Error. The USB driver is not stable and caused an error.
Remedy: • Bad USB card connection • Replace the controller board

Code: SC860

Description: HDD startup error at main power ON. • HDD is connected but a driver error is detected. • The driver does not respond with the status of the HDD within 30 s.
Remedy: • HDD is not formatted • Label name input during formatting is corrupted; format the hard disk again • HDD is defective

Code: SC861

Description: HDD re-try failure. At power ON with the HDD detected, power supply to the HDD is interrupted, after the HDD is awakened from the sleep mode, the HDD is not ready within 30 s.
Remedy: • Harness between HDD and board disconnected, defective • HDD power connector disconnected • HDD defective • Controller board defective

Code: SC863

Description: HDD data read failure. The data written to the HDD cannot be read normally, due to bad sectors generated during operation.
Remedy: • HDD defective Note: If the bad sectors are generated at the image partition, the bad sector information is written to NVRAM, and the next time the HDD is accessed, these bad sectors will not be accessed for read/write operation.

Code: SC864

Description: HDD data CRC error. During HDD operation, the HDD cannot respond to an CRC error query. Data transfer did not execute normally while data was being written to the HDD.
Remedy: • HDD defective

Code: SC865

Description: HDD access error. HDD responded to an error during operation for a condition other than those for SC863, 864.
Remedy: • HDD defective.

Code: SC866

Description: SD card error 1: Confirmation. The machine detects an electronic license error in the application on the SD card in the controller slot immediately after the machine is turned ON. The program on the SD card contains electronic confirmation license data. If the program does not contain this license data, or if the result of the check shows that the license data in the program on the SD card is incorrect, then the checked program cannot execute and this SC code is displayed.
Remedy: • Program missing from the SD card • Download the correct program for the machine to the SD card

Code: SC867

Description: SD card error 2: SD card removed. The SD card in the boot slot when the machine was turned on was removed while the machine was ON.
Remedy: • Insert the SD card, then turn the machine OFF and ON.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie