Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 65 — Trang 14/15

Code: EAC

Description: Finisher saddle stitcher transport delay jam
Remedy:

Code: EAD

Description: Print end command time-out jam
Remedy:

Code: EAE

Description: Finisher receive time-out jam
Remedy:

Code: EB3

Description: Finisher ready time-out error
Remedy:

Code: EB5

Description: PSTPR-L standby time-out error
Remedy:

Code: EB6

Description: PSTPR-H standby time-out error
Remedy:

Code: F07

Description: Communication error between SYS and LGC boards
Remedy: (1) Check the connectors J102 and J108 on the SYS board for disconnection. (2) Check the connector J330 on the LGC for disconnection. (3) Check the connector J2 on the SLG board for disconnection. (4) Check the harness between the SYS and the SLG for breaks and disconnected pins. (5) Check the harness between the SYS and the LGC for breaks and disconnected pins. (6) Check the FROM version on the SYS board. (7) Check the MROM (IC36) version on the LGC board. (8) Check the SROM version on the SLG board. (9) Replace the SYS board. (10) Replace the SLG board. (11) Replace the LGC board.

Code: F10

Description: HDD formatting error
Remedy: (1) Perform the “HDD formatting” (Setting Mode: 08 -> 690 -> 2). (2) Make sure that the HDD is mounted. (3) Make sure that a dedicated HDD is mounted. (4) Make sure that the HDD connector pins are not bent. (5) Check HDD connector J106 on the SYS board for disconnection. (6) Replace the harness. (7) Replace the HDD. (8) Replace the SYS board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie