Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 6540c — Trang 41/44

Code: F109_2

Description: Key consistency error: Signature Check public key damage.
Causes:
Remedy: Reboot the equipment. If it cannot be recovered, reinstall the software in the following procedure. (1) Install the OS data. (2) Reinstall the master data and application program.

Code: F109_3

Description: Key consistency error: HDD encryption parameter damage.
Causes:
Remedy: Encryption key status confirmation Check the message displayed by [3] + [C] + [POWER] → 5. Key Backup Restore.

Code: F109_4

Description: Key consistency error: license data damage.
Causes:
Remedy: Encryption key status confirmation Check the message displayed by [3] + [C] + [POWER] → 5. Key Backup Restore

Code: F109_5

Description: Key consistency error (encryption key for ADI-HDD is damaged)
Causes:
Remedy: Encryption key status confirmation Check the message displayed by [3] + [C] + [POWER] → 5. Key Backup Restore.

Code: F109_6

Description: Key consistency error (administrator password error for ADI-HDD authentication)
Causes:
Remedy: Encryption key status confirmation Check the message displayed by [3] + [C] + [POWER] → 5. Key Backup Restore.

Code: F110

Description: Communication error between System-CPU and Scanner-CPU
Causes: SYS board SLG board
Remedy: Reproducibility Turn the power OFF and then back ON using the main power switch. SYS board • Check the version of the system ROM. • Connector check SLG board • Check the version of the scanner ROM. • Connector check IMG board • Connector check

Code: F111

Description: Scanner response abnormality
Causes: SYS board SLG board
Remedy: Reproducibility Turn the power OFF and then back ON using the main power switch. SYS board • Check the version of the system ROM. • Connector check SLG board • Check the version of the scanner ROM. • Connector check IMG board • Connector check

Code: F120

Description: Database abnormality: Database is not operating normally
Causes:
Remedy: Setting 1. Check that no jobs remain and rebuild the databases. ([5] + [C] + [POWER] → 4. Initialize database → 1. LDAP DB and 2. Log DB (Job,Msg). 2. If the error is not recovered, reinstall the system software. ([4] + [9] + [POWER] → 4. System Software(HD data)) Notes: • If you rebuild the databases with a job remaining, delete it after finishing. • When "Rebuilding all databases” is performed, all data including log/user/role/group/department information and address book data are deleted. If you back up the data in advance, they will be recovered by restoring them after rebuilding the database.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie