Description: The fuser is either missing or requires reseating to be recognized by the printer. Turn off the printer, make sure the fuser is properly installed and turn on the printer. If the problem persists, install a new fuser.
Remedy: 1. Remove and reinstall the fuser. 2. install a new fuser. 3. Replace the low-voltage power supply. 4. Replace the engine controller board.
Description: There was a hard disk read error that prevented the data from being read. Press the Enter button to clear the message. Turn off the printer, wait 15 seconds, then turn on the printer.
Remedy: 1. Turn the printer off and on again. 2. Ensure the hard drive is properly installed. 3. Re initialize the hard drive. by scrolling to the Reset Menu and selecting the submenu item Disk Init. 4. Replace the hard drive. 5. Replace the system controller board
Description: There was a hard disk write error that prevented the data from being written. Press the Enter button to clear the message. Turn off the printer, wait 15 seconds, then turn on the printer.
Remedy: 1. Turn the printer off and on again. 2. Ensure the hard drive is properly installed. 3. Re initialize the hard drive. by scrolling to the Reset Menu and selecting the submenu item Disk Init. 4. Replace the hard drive. 5. Replace the system controller board
Description: There was a hard disk full error that prevented the data from being written. Press the Enter button to clear the message. Print or delete Secure Print and Proof Print jobs to free up disk space.
Remedy: 1. Turn the printer off and on again. 2. Ensure the hard drive is properly installed. 3. Re initialize the hard drive. by scrolling to the Reset Menu and selecting the submenu item Disk Init. 4. Replace the hard drive. 5. Replace the system controller board
Description: The fuser has reached its end of life. Install a new fuser.
Remedy: 1. Install a new fuser. 2. If a new fuser has been installed but the print engine continues to ask for a new fuser, reset the fuser life count using the topic “Consumable count initialization”. Replace the engine controller board.
Description: The transfer belt has reached its end of life. Install a new transfer belt.
Remedy: 1. Install a new transfer belt. 2. If a new transfer belt has been installed but the print engine continues to ask for a new transfer belt, reset the transfer belt life count using the topic “Consumable count initialization”. Replace the engine controller board.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.