Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Xerox Phaser 2135 — Trang 4/8

Code: J5, J6, J7, J8

Display: Jn-Replace Drum [J5-Replace Yellow Drum] [J6-Replace Magenta Drum] [J7-Replace Cyan Drum] [J8-Replace Black Drum]
Description: The imaging drum has reached its end of life. Install a new imaging drum.
Remedy: 1. Install a new drum unit. 2. If a new drum unit has been installed but the print engine continues to ask for a new drum unit, reset the drum unit life count using the topic “Consumable count initialization”. Inspect the spring-loaded drum unit contacts (in a set of three). Ensure they are clean and move up and down freely. Remove and reseat them, if necessary. 4. Replace the engine controller board.

Code: J9, J10, J11, J12

Display: Jn-Toner Empty [J9-Yellow Toner Empty] [J10-Magenta Toner Empty] [J11-Cyan Toner Empty] [J12-Black Toner Empty]
Description: The toner cartridge has reached its end of life. Install a new toner cartridge.
Remedy: 1. Install a new toner cartridge. 2. If a new cartridge has been installed but the print engine continues to ask for a new cartridge, reset the toner cartridge life count using the topic “Consumable count initialization”. Replace the drum unit. 4. Replace the engine controller board.

Code: L0

Display: Load Tray #, Size Type
Description: Load Tray # 1 Size 2 Type 3
Remedy: 1. Load the requested size and type of paper in the tray. 2. Ensure the tray is installed correctly. 3. Inspect and test the paper size sensors and the tray’s corresponding sensor flags. 4. Replace the paper tray sensor board. 5. Replace the paper tray. 6. Replace the engine controller board.

Code: T1

Display: T1-Fuser Upper Error
Description: A short fault in the upper fuser Thermistor was discovered. Turn off the printer, wait 15 seconds, then turn on the printer. If the problem persists, install a new fuser.
Remedy: 1. Remove and install the fuser. 2. Test the thermistors inside the fuser using the test described in “Switch scan test”. Replace the fuser. 4. Replace the low-voltage power supply. 5. Replace the engine controller board.

Code: T2

Display: T2-Fuser Lower Error
Description: A short fault in the lower fuser Thermistor was discovered. Turn off the printer, wait 15 seconds, then turn on the printer. If the problem persists, install a new fuser.
Remedy: 1. Remove and install the fuser. 2. Test the thermistors inside the fuser using the test described in “Switch scan test”. Replace the fuser. 4. Replace the low-voltage power supply. 5. Replace the engine controller board.

Code: T29

Display: T29-Temp Sensor Error
Description: The temperature sensor is either not communicating or reporting invalid data. To reset the sensor, open and close the top cover.
Remedy: 1. Test the temperature sensor or the relative humidity sensor using the sensor test described in “Switch scan test”. Inspect the wiring harness leading to the entrance sensor board. 3. Replace the temperature/humidity sensor board. 4. Replace the engine controller board.

Code: T30

Display: T30-RH Sensor Error
Description: The relative humidity sensor is either not communicating or reporting invalid data. Turn off the printer, wait 15 seconds, then turn on the printer.
Remedy: 1. Test the temperature sensor or the relative humidity sensor using the sensor test described in “Switch scan test”. Inspect the wiring harness leading to the entrance sensor board. 3. Replace the temperature/humidity sensor board. 4. Replace the engine controller board.

Code: T31

Display: T31-Roller Over Error
Description: The fuser temperature sensor is reporting a temperature error. Turn off the printer, wait 15 seconds, then turn on the printer. If the problem persists, install a new fuser
Remedy: 1. Inspect the fuser cooling fan. Ensure it is running correctly and is not blocked. 2. Remove and install the fuser. 3. Test the thermistor inside the fuser using the test described in “Switch scan test”. Replace the fuser. 5. Replace the low-voltage power supply. 6. Replace the engine controller board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie