• Code: 116-362
• Description: PCI Bus #0 Host Bridge Controller Error Cause: PCI Bus #0 Host Bridge Controller Error. (Connected with Remora EX port)
• Remedy: 1. Turn the power Off and On to check that the error recurs. 2. Update to the latest F/W. 3. If the problem cannot be solved, replace (ESS PWB).

• Code: 116-363
• Description: PCI Bus #1 Host Bridge Controller Error Cause: PCI Bus #1 Host Bridge Controller Error. (Connected with Remora EX port.)
• Remedy: 1. Turn the power Off and On to check that the error recurs. 2. Update to the latest F/W. 3. If the problem cannot be solved, replace (ESS PWB).

• Code: 116-364
• Description: Timer Fail Cause: Timer error is detected.
• Remedy: 1. Turn the power Off and On to check that the error recurs. 2. Update to the latest F/W. 3. If the problem cannot be solved, set the RTC correctly.

• Code: 116-366
• Description: PCI Bus #1 Error Detected> Cause: PCI Bus #1 Uncorrectable Error Detected. (Connected with RemoraEX(x1 port))
• Remedy: 1. Turn the power Off and On to check that the error recurs. 2. Update to the latest F/W. 3. If the problem cannot be solved, replace (ESS PWB).

• Code: 116-368
• Description: PCI Error Messages received from Bus #0 - Device #1 Cause: Remora EX PCI x1 port Error. (Device ID 0x65 (x1))
• Remedy: 1. Turn the power Off and On to check that the error recurs. 2. Update to the latest F/W. 3. If the problem cannot be solved, replace (ESS PWB).

• Code: 116-369
• Description: PCI Error Messages received from Bus #0 - Device #0 Cause: Remove EX PCI x4 port Error. (Device ID 0x64 (x4))
• Remedy: 1. Turn the power Off and On to check that the error recurs. 2. Update to the latest F/W. 3. If the problem cannot be solved, replace (ESS PWB).

• Code: 116-390
• Description: ESS NVRAM1 SIZE And ID Check Fail Cause: Detected by consistency check between NVRAM size requested by the system and actual size and consistency check of ID recorded at the first power-on.
• Remedy: 1. Turn the power Off and On to check that the error recurs. 2. Update to the latest F/W. 3. If the problem cannot be solved, replace (ESS PWB).

• Code: 116-396
• Description: Fatal Error Related to Maillib Other Errors (of File 2 Net Library) Cause: S/W bug.
• Remedy: 1. Turn the power Off and On to check that the error recurs. 2. Perform the following in sequence • " Network System Fault Check" • " Network-related Details Check Flow" 3. Update to the latest F/W. 4. If the error persists, ensure that the error is replicated after the printer is powered Off and then On, and then replace (ESS PWB).