Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Xerox Phaser 6121 MFP

Code: 0001

Display: Main motor failure CODE (001) Turn power off, on
Description: Main Motor Failure The Main Motor lock signal remains HIGH for a predetermined consecutive period of time while the Main Motor remains energized.
Causes: • Main Motor, PL9.1.6 • Engine Control Board, PL13.0.20 • Power Supply, PL13.0.17

Code: 001B

Display: Toner rack failure CODE (001B) Turn power off, on
Description: Toner Rack Failure
Causes: • Rack Positioning Sensor, PL5.1.12 • Engine Control Board, PL13.0.20

Code: 0045

Display: Scanner fan failure CODE (0045) Turn power off, on
Description: Scanner Fan Failure • The Exit Tray Cooling Fan Motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The fan motor lock signal remains HIGH for a given period of consecutive time while the exit tray cooling fan motor is being rotated.
Causes: • Engine Control Board, PL13.0.20 • Image Processor Board, PL2.0.4

Code: 004A

Display: Duplex fan failure CODE (004A) Turn power off, on
Description: Duplex Unit Fan Failure The Duplex Unit Fan Motor lock signal remains HIGH for a predetermined consecutive period of time while the cooling fan motor remains energized.
Causes: • Engine Control Board, PL13.0.20 • Duplex Unit, PL14.1

Code: 004C

Display: Exhaust fan failure CODE (004C) Turn power off, on
Description: Exhaust Fan Failure The Ventilation Fan Motor does not rotate evenly even after the lapse of a given period of time while it is starting.
Causes: • Ventilation Fan Motor, PL7.2.20 • Engine Control Board, PL13.0.20 • Power Supply, PL13.0.17

Code: 004E

Display: LVPS fan failure CODE (004E) Turn power off, on
Description: LVPS Fan Failure • The Power Supply Cooling Fan Motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the Power Supply Cooling Fan Motor is being rotated.
Causes: • Power Supply Cooling Fan Motor, PL12.0.11 • Engine Control Board, PL13.0.20 • Power Supply, PL13.0.17

Code: 0092

Display: Trans. belt failure CODE (0092) Turn power off, on
Description: Transfer Belt Failure The belt positioning sensor does not detect the transfer belt position detection hole a second time even after the lapse of a predetermined period of time after it has detected one while the transfer belt is rotated.
Causes: • Imaging Unit, PL4.0.13 • Engine Control Board, PL13.0.20

Code: 0094

Display: Trans. roll failure CODE (0094) Turn power off, on
Description: Transfer Roll Failure Possible causes: • The 2nd Image Transfer Retraction Position Sensor(PS3) is not activated (retracted position) within a given period of time after the retraction sequence of the 2nd transfer roller has been started. • The 2nd Image Transfer Retraction Position Sensor is not deactivated (pressed position) within a given period of time after the pressure sequence of the 2nd transfer roller has been started.
Causes: • 2nd Image Transfer Retraction Position Sensor (PS3), PL4.0.9 • 2nd Image Transfer Retraction Position Solenoid (SD4), PL7.2.23 • Main Motor, PL9.1.6 • Engine Control Board, PL13.0.20
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie