Code :

Code: 13DD
Display: Initial toner failed CODE (13DD) Replace toner Contact Xerox for unit exchange
Description: Initial Toner Failure The printer determines that an initial toner cartridge has been installed. The printer is programmed to only use initial toner cartridges one time.
Causes:

Code: 13E2
Display: Engine ROM failure CODE (13E2) Turn power off, on
Description: Engine ROM Failure Flash ROM writing is found faulty during a check.
Causes: • Engine Control Board, PL13.0.20 • Image Processor Board, PL2.0.4

Code: 14A3
Display: Scanner head failure CODE (14A3) Turn power off, on
Description: Scanner Head Failure The intensity of the light emitted from the exposure lamp of the scanner falls short of the specified value.
Causes: • Scanner, PL2.0.4 • Image Processor Board, PL13.0.29/30

Code: 3FFF
Display: Control ROM failure CODE (3FFF) Turn power off, on
Description: Control ROM Failure • The copier determines that there is an error if writing to the flash ROM fails during upgrading of the firmware. • When the power switch is turned ON, the error indicator lights up steadily and a corresponding message appears on the display. • If this error message appears, no operations are possible. It is not possible to upgrade the firmware from a PC connected through USB connection.
Causes: • Engine Control Board, PL13.0.20 • Image Processor Board, PL13.0.29/30

< 1 2 3 4 >