Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Xerox Phaser 7800 — Trang 43/58

Code: 377.215

Description: Tray Module Communication Fault. Communication error between Tray Module PWB and MCU PWB was detected.
Remedy: 1. Turn the power Off and On. 2. Turn the power Off and check the connection between the MD PWB P592 and the Tray Module PWB P/J541 for open circuit, short circuit, and poor contact. If no problems are found, replace the following parts in sequence: • Tray Module PWB (PL 10.9) • MD PWB • MCU PWB

Code: 377.300

Description: Front Cover Interlock Open. The Front Cover is open.
Remedy: Check the following: • The Front Cover for damage or mismatch. • The Front Cover Interlock Switch for failure: dc330 Component Control [077-303] (PL 18.5) • The connection between the Front Cover Interlock Switch P/J101 and the MD PWB P/ J521 for open circuit, short circuit, and poor contact If no problems are found, replace the following parts in sequence: • MD PWB • MCU PWB

Code: 377.301

Description: L/H Cover Interlock Open. The L/H Cover is open.
Remedy: Check the following: • The L/H Cover Unit for damage or mismatch • The L/H Cover Interlock Switch for failure: dc330 Component Control [077-300] (PL 14.1) • The connection between the L/H Cover Interlock Switch P/J100 and the MD PWB P/ J534 for open circuit, short circuit, and poor contact If no problems are found, replace the following parts in sequence: • MD PWB • MCU PWB

Code: 377.305

Description: Tray Module L/H Cover Open. The Tray Module L/H Cover is open.
Remedy: 1. Turn the power Off and On. 2. Check the following: • The Tray Module L/H Cover for damage or mismatch • The Tray Module L/H Cover Switch for failure: dc330 Component Control [077-306] (PL 10.12) • The connection between the Tray Module L/H Cover Switch P/J104 and the Tray Module PWB P/J549 for open circuit, short circuit, and poor contact If no problems are found, replace the Tray Module PWB.

Code: 377.307

Description: Duplex Cover Open. The Duplex Cover is open.
Remedy: Check the following: • The Duplex Cover for damage or mismatch. • The Duplex Cover Switch for failure: dc330 Component Control [077-305] (PL 14.5) • The connection between the Duplex Cover Switch P/J176 and the MD PWB P/J523 for open circuit, short circuit, and poor contact If no problems are found, replace the following parts in sequence: • MD PWB • MCU PWB

Code: 377.308

Description: L/H High Cover Open. The L/H High Cover is open.
Remedy: Check the following: • The L/H High Cover Assembly for damage or mismatch • The L/H High Cover Switch for failure: dc330 Component Control [077-302] (PL 17.4) • The connection between the L/H High Cover Switch P/J168 and the MD PWB P/J522 for open circuit, short circuit, and poor contact If no problems are found, replace the following parts in sequence: • MD PWB • MCU PWB

Code: 377.314

Description: P/H Module Logic Fault. A fatal error was detected in the Tray Module.
Remedy: 1. Turn the power Off and On. 2. Turn the power Off and check the connection between the MD PWB P/J542 and the Tray Module PWB P/J541 for open circuit, short circuit, and poor contact. If no problems are found, replace the following parts in sequence: • Tray Module PWB • MD PWB • MCU PWB

Code: 377.320

Description: All Feed Tray Broken. All the Feed Trays that are connected to the IOT were detected to have malfunctioned.
Remedy: Enter dc122 Fault History. Go to the RAP of the affected Paper Tray.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie