Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Xerox Phaser 8200 — Trang 7/13

Code: 16,003.45

Display: 16,003.45: TCP_THERMISTOR_ HOT
Description: The preheater heater is running away. Unplug the printer NOW! Check the preheater cabling. Replace the preheater.

Code: 16,004.46

Display: 16,004.46: TCP_THERMISTOR_ SLOW
Description: The preheater is not heating at all, or is not heating as quickly as it should. Check for an open connection. Replace the paper preheater. Replace the power supply.

Code: 16,005.47

Display: 16,005.47 TCP_THERMISTOR_ADC _BAD
Description: An inalid reading is being reported by the preheater thermistor. Verify the connections to the paper preheater, replace the paper preheater, replace the main board, and then replace the power control board.

Code: 19,001.4X

Display: 19,001.4X HC_DEV_FAULT (0x01)
Description: Occurs during the scales and offset calibration. Any part in the chain could be responsible for the incorrect reading including the printhead electronics, the A/D electronics, the waveform generation electronics, power supply, wave amplifier (on the power control board), printhead interconnect cable.

Code: 19,002.4X

Display: 19,002.4X HC_DEV_FAULT (0x02)
Description: Occurs when the printer is attempting to determine how many data taps the printhead uses. Any part in the chain may be responsible for the reading, including the printhead electronics, the A/D electronics, the waveform generation electronics, power supply, wave amplifier (on the power control board), and printhead interconnect cable.

Code: 19,008.63

Display: 19,008.63 HC_PROG_FAULT(8)
Description: Incorrect Printhead Installed. The printhead installed on the printer is not the correct type the software was compiled for.

Code: 2,001.40

Display: 2,001.40: SY_DEV_FAULT_IO_ RIGHT
Description: The engine cannot detect the presence of the right I/O board. Ensure the connections are sound.

Code: 2,002.40

Display: 2,002.40: SY_DEV_FAULT_IO_ LEFT
Description: The engine cannot detect the presence of the left I/O board. Ensure the connections are sound.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie