Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Xerox WorkCentre 3325 — Trang 5/6

Code: 10-100, 10-200

Display: Open Fuser error Low Heat error
Description: The Fuser did not reach a Ready temperature during operation. Plug the printer directly into the wall outlet.
Causes: • Thermistor • Fuser

Code: 10-300

Display: Over Heat error
Description: The Fuser exceeded temperature set points. Check the Fuser and Fan vents for debris.
Causes: • Thermistor • Fuser

Code: 14-100

Display: Scanner Lock
Description: Scanner lock error occurred.
Causes:

Code: 17-100

Display: IP Conflict or Network Problem: IP Conflict.
Description: Two devices are trying to use the same IP address.
Causes:

Code: 17-200

Display: Network Problem
Description: Network cable is not connected
Causes: • Main Board

Code: 17-562, 17-563

Display: No LUI message required
Description: Machine is unable to contact the remote Xerox SMart eSolutions Communication Server. Review SMart eSolutions settings.
Causes:

Code: 17-700

Display: BOOTP problem
Description: BOOPT error and Auto IP is working. Input new static IP address or correct the BOOTP server address.
Causes:

Code: 17-710

Display: BOOTP problem
Description: BOOPT error and Auto IP is not working. Input new static IP address or correct the BOOTP server address.
Causes:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie