Description: Collate Full Cause: Unable to collate due to insufficient memory.
Remedy: The machine will recover after the OK button is pressed or message is displayed for specified time. If the error persists: 1. Split the document into blocks to decrease the number of pages to be collated. 2. Upgrade SD CARD as required. 3. Take corrective actions at the host side.
Description: WSD (Web Services on Device) Scan destination error Cause: The scan job cannot be executed on the device-driven Web Services on Device Scan, because the destination PC has been stopped.
Remedy: The machine will recover after the OK button is pressed or message is displayed for specified time. If the error persists: 1. Check the destination PC. 2. Perform the following in sequence. • " Network System Fault Check" • " Network-related Details Check Flow" 3. Take corrective actions at the host side.
Description: Fatal Error Related to Format Library Cause: S/W bug.
Remedy: 1. Turn the power Off and On to check that the error recurs. 2. Perform the following in sequence • " Network System Fault Check" • " Network-related Details Check Flow" 3. Update to the latest F/W. 4. If the error persists, ensure that the error is replicated after the printer is powered Off and then On, and then replace (ESS PWB).
Description: Device Memory Error Cause: SD CARD Type Invalid.
Remedy: 1 Is the regular SD CARD used? Go to Step 2. Use the regular SD CARD 2 Is the Connector (P/J221) between the SD CARD and the ESS PWB free of broken/bent pins, foreign substances, burns, and etc., and is the unit installed properly? Go to Step 3. Reinstall the SD CARD 3 • Replace the SD CARD. • Does an error occur? Replace (ESS PWB) Troubleshooting complete.
Description: IPS Error Cause: In relation to IPS, the following internal error has occurred. • OS function return value error • DSP program load fail
Remedy: 1. Turn the power Off and On to check that the error recurs. 2. Update to the latest F/W. 3. If the problem cannot be solved, replace (ESS PWB).
Description: Enable Device Memory Error Cause: Invalid, although SD CARD was detected. This error will be outputted if SD CARD is removed where the power is on.
Remedy: 1 Is the Connector (P/J221) between the SD CARD and the ESS PWB free of broken/bent pins, foreign substances, burns, and etc., and is the unit installed properly? Replace the SD CARD. Reinstall the SD CARD
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.