Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Xerox WorkCentre 5765 — Trang 2/27

Code: 03-315, 03-325, 03-347, 03-348, 03-349, 03-355, 03-400

Description: Single Board Controller PWB Failure RAP 03-315 The single board controller PWB has performed a crash recovery procedure. 03-325 A single board controller PWB clock is not functioning. 03-347 The single board controller PWB POST has failed the EPC test. 03-348 The single board controller PWB POST has failed the ASIC test. 03-349 The single board controller PWB POST has failed the rotation memory test. 03-355 The single board controller PWB POST has failed the NVM integrity test. 03-400 The single board controller PWB cannot detect additional EPC memory.
Remedy: 1. Ensure all the connectors on the PWBs that follow are correctly and securely seated: • Single board controller PWB, PL 3.24 Item 3. • Software module, PL 3.24 Item 8. • Memory module, PL 3.24 Item 12. • (W/TAG 150) Scanner daughter PWB, PL 3.24 Item 20. 2. Install new parts as necessary: • Memory module, PL 3.24 Item 12. • Software module, PL 3.24 Item 8. • (W/TAG 150) Scanner daughter PWB, PL 3.24 Item 20. • Single board controller PWB, PL 3.24 Item 3.

Code: 03-320 ... 03-324

Description: Single Board Controller PWB to DADH Error RAP 03-320 Communications between the single board controller PWB and the DADH have failed. 03-321 Communications between the single board controller PWB and the DADH are out of sequence. 03-322 The DADH has detected a read/write error. 03-323 The DADH has detected a software error. 03-324 The DADH has detected a boot check sum error.
Remedy: 1. Ensure all the connectors on the PWBs that follow are correctly and securely seated: • Single board controller PWB, PL 3.24 Item 3. • Scanner daughter PWB, PL 3.24 Item 20. • Power distribution PWB, PL 3.24 Item 5. • DADH PWB, PL 5.10 Item 5. Check also, the in-line connector in the communications/power cable, PL 5.10 Item 6. 2. Go to Flag 2. Check the voltages. Refer to: • 01B 0V Distribution RAP. • 01D +3.3V Distribution RAP. • 01G +24V Distribution RAP. 3. Go to Flag 1 and Flag 2. Check the wiring, GP 7. If necessary, install a new communication/ power cable, PL 5.10 Item 6. 4. If the fault was detected during a software upgrade, go to Flag 3. Check the connection. Reload the software, GP 4, Machine Software. 5. Install new components as necessary: • Single board controller PWB, PL 3.24 Item 3. • DADH PWB, PL 5.10 Item 5.

Code: 03-330, 03-462

Description: Single Board Controller PWB to Scanner Fault Entry RAP 03-330 A single board controller PWB to scanner PWB communications error has been detected. 03-462 A speed mismatch between the single board controller PWB and the scanner has been detected in the NVM.
Remedy: Perform one of the steps that follow: • For machines W/O TAG 150, go to the 03-330A, 03-462A Single Board Controller PWB to Scanner Faults RAP (W/O TAG 150). • For machines W/TAG 150, go to the 03-330B, 03-462B Single Board Controller PWB to Scanner Faults RAP (W/TAG 150).

Code: 03-330A, 03-462A

Description: Single Board Controller PWB to Scanner Fault RAP (W/O TAG 150)
Remedy: 1. Ensure all the connectors on the PWBs that follow are correctly and securely seated: • Single board controller PWB, PL 3.24 Item 3. • Power distribution PWB, PL 3.24 Item 5. • Scanner PWB, PL 14.25 Item 4. • CCD PWB, PL 14.25 Item 19. NOTE: To gain access to the scanner PWB, remove the document glass, PL 14.20 Item 5 and the scanner PWB cover, PL 14.25 Item 1. 2. Go to Flag 1, Flag 2 and Flag 3. Check the wiring. Repair or install new harnesses as necessary, PL 14.25 Item 5 or PL 14.25 Item 13. NOTE: Flag 4 indicates the main communication lines. 3. Go to Flag 1 and Flag 2. Check the voltages. Refer to: • 01B 0V Distribution RAP. • 01D +3.3V Distribution RAP. • 01F +12V Distribution RAP. • 01G +24V Distribution RAP. 4. Re-load the software, GP 4 Machine Software. 5. If necessary, install new components: • Single board controller PWB, PL 3.24 Item 3. • Power distribution PWB, PL 3.24 Item 5. • Scanner PWB, PL 14.25 Item 4. • Scanner module, PL 14.20 Item 1.

Code: 03-330B, 03-462B

Description: Single Board Controller PWB to Scanner Fault RAP (W/TAG 150)
Remedy: 1. Ensure all the connectors on the PWBs that follow are correctly and securely seated: • Single board controller PWB, PL 3.24 Item 3. • Power distribution PWB, PL 3.24 Item 5. • Scanner PWB, PL 14.25 Item 4. • CCD PWB, PL 14.25 Item 19. • Scanner daughter PWB, PL 3.24 Item 20. NOTE: To gain access to the scanner PWB, remove the document glass, PL 14.10 Item 5 and the scanner PWB cover, PL 14.15 Item 1. 2. Go to Flag 1, Flag 2 and Flag 3. Check the harnesses, GP 7. Repair or install new harnesses as necessary: • Scanner daughter PWB/scanner PWB video harness, PL 14.15 Item 13. • Single board controller/DADH comms/scanner PWB harness, PL 3.24 Item 7. 3. Go to Flag 3. Check the voltages. Refer to: • 01B 0V Distribution RAP. • 01D +3.3V Distribution RAP. • 01E +5V Distribution RAP. • 01F +12V Distribution RAP. • 01G +24V Distribution RAP. 4. Re-load the software, GP 4, Machine Software. 5. If necessary, install new components: • Scanner daughter PWB, PL 3.24 Item 20. • Scanner PWB, PL 14.15 Item 4. • Power distribution PWB, PL 3.24 Item 5. • Single board controller PWB, PL 3.24 Item 3.

Code: 03-336

Description: FAX Card Self Test Failure RAP 03-336 Power on self test failure detected on the embedded fax PWB.
Remedy: Perform the following: 1. Go to 20G Embedded FAX Checkout. 2. Clear the fax card NVM. Go to dC132, select Embedded Fax NVM initialization and perform the routine, Reformat. 3. Install a new embedded fax PWB, PL 20.10 Item 4.

Code: 03-338

Description: FAX Communication Error RAP 03-338 No response detected to commands from the single board controller PWB to the embedded fax PWB.
Remedy: Perform the following: 1. Remove, then re-install the embedded fax PWB, PL 20.10 Item 4. 2. Go to 20G Embedded Fax Checkout. 3. (W/O TAG X-001) Install a new compact flash memory, PL 20.10 Item 3. 4. Install new embedded fax PWB, PL 20.10 Item 4.

Code: 03-340, 03-416

Description: Single Board Controller PWB to Network Controller Fault RAP 03-340 The network communications with the single board controller PWB have failed. 03-416 The network controller software version supplied at power on is not compatible with the single board controller PWB software.
Remedy: 1. Ensure that the ethernet connector P/J114 on the Single Board Controller PWB is securely connected. 2. Perform the 03C Hard Disk Failure RAP. 3. Reload the software, GP 4 Machine Software. 4. Install new components as necessary: • Software module, PL 3.24 Item 8. • Hard disk drive, PL 3.22 Item 2. • Single board controller PWB, PL 3.24 Item 3.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie