• Code: 01
• Display:
• Description: All LEDs light, but nothing displays on LCD and printer does not operate.
• Causes: Main logic board or Flash faulty.

• Code: 02
• Display:
• Description: All LEDs flash.
• Causes: No significant amount of DRAM tested good.

• Code: 03
• Display:
• Description: Take-Label LED flashes.
• Causes: Printer misconfigured for Peel-Off Mode.

• Code: 04
• Display:
• Description: Printer locks up while running Power-On Self Test.
• Causes: Main logic board failure.

• Code: 05
• Display: EEPROM checksum invalid
• Description:
• Causes: EEPROM checksum is incorrect.

• Code: 06
• Display: ERROR CONDITION PAPER OUT
• Description:
• Causes: No media loaded or incorrectly loaded. Misadjusted media sensor. Maximum label length set shorter than label length. Printer set for non-continuous media, but continuous media is loaded.

• Code: 07
• Display: ERROR CONDITION RIBBON OUT
• Description:
• Causes: For Thermal Transfer: Ribbon not loaded or incorrectly loaded. or Ribbon sensor not sensing ribbon that is correctly loaded.

• Code: 08
• Display: WARNING RIBBON IN
• Description:
• Causes: For Direct Thermal: Ribbon loaded unnecessarily.