• Code: D9-nn-Error
• Description: System error
• Causes: System error
• Remedy: • Turn OFF and then ON the main power. If the error persists, obtain the following information and contact the department in charge of quality management. • Output STATUS PRINT/ P-PRINT. • Collect Sublog • Collect information on conditions to reproduce the error • Obtain user's print data (binary data)

• Code: E000-0000
• Description: Fixing temperature rising error
• Causes: Temperature of the Main Thermistor did not become the specified temperature although the specified time had passed.
• Remedy: 1. Check the connector between the Fixing Assembly and the Fixing Power Supply Unit. 2. Replace the Fixing Assembly. 3. Replace the Fixing Power Supply Unit.

• Code: E001-0000
• Description: Abnormally high fixing temperature 1
• Causes: The Main Thermistor detected a temperature higher than the specified temperature.
• Remedy: 1. Check the connector between the Fixing Assembly and the Fixing Power Supply Unit. 2. Replace the Fixing Assembly. 3. Replace the Fixing Power Supply Unit.

• Code: E004-0000
• Description: Fixing Drive Assembly circuit error
• Causes: Error in either the Fixing Heater or the Fixing Motor
• Remedy: 1. Check the connector between the Fixing Assembly and the Fixing Power Supply Unit. 2. Check the connection of the Fixing Motor. 3. Replace the Fixing Assembly. 4. Replace the Fixing Motor. 5. Replace the Fixing Power Supply Unit.

• Code: E004-0005
• Description: Fixing Area Error
• Causes: Fixing Relay Error
• Remedy: 1. Check the connector between the DC Controller PCB and the Fixing Power Supply PCB. 2. Replace the Fixing Power Supply PCB. 3. Replace the DC Controller PCB.

• Code: E014-0000
• Description: Fixing Motor error
• Causes: Error in startup of the Fixing Motor
• Remedy: 1. Check the connection of the Fixing Motor. 2. Replace the Fixing Motor. 3. Replace the DC Controller PCB.

• Code: E014-0001
• Description: Fixing Motor error
• Causes: Error in rotation of the Fixing Motor
• Remedy: 1. Check the connection of the Fixing Motor. 2. Replace the Fixing Motor. 3. Replace the DC Controller PCB.

• Code: E015-0001
• Description: Cassette 1 lift-up error
• Causes: Cassette 1 Lifter Motor error
• Remedy: 1. Check the Cassette 1 Lifter Motor (dropout, gear tooth jump, etc.). 2. Check the connector between the Cassette 1 Lifter Motor and the DC Controller PCB. 3. Replace the Cassette 1 Lifter Motor. 4. Replace the DC Controller PCB.