• Code: E015-0002
• Description: Cassette 2 lift-up error
• Causes: Cassette 2 Lifter Motor error
• Remedy: 1. Check the Cassette 2 Lifter Motor (dropout, gear tooth jump, etc.). 2. Check the connector between the Cassette 2 Lifter Motor and the Cassette 2 Driver PCB. 3. Replace the Cassette 2 Lifter Motor. 4. Replace the Cassette 2 Driver PCB.

• Code: E015-0003
• Description: Cassette 3 lift-up error
• Causes: Cassette 3 Lifter Motor error
• Remedy: 1. Check the Cassette 3 Lifter Motor (dropout, gear tooth jump, etc.). 2. Check the connector between the Cassette 3 Lifter Motor and the Cassette 3 Driver PCB. 3. Replace the Cassette 3 Lifter Motor. 4. Replace the Cassette 3 Driver PCB.

• Code: E015-0004
• Description: Cassette 4 lift-up error
• Causes: Cassette 4 Lifter Motor error
• Remedy: 1. Check the Cassette 4 Lifter Motor (dropout, gear tooth jump, etc.). 2. Check the connector between the Cassette 4 Lifter Motor and the Cassette 4 Driver PCB. 3. Replace the Cassette 4 Lifter Motor. 4. Replace the Cassette 4 Driver PCB.

• Code: E066-0000
• Description: Environment Sensor error
• Causes: Failure of the Environment Sensor was detected.
• Remedy: 1. Check the connection of the Environment Sensor. 2. Replace the Environment Sensor. 3. Replace the DC Controller PCB.

• Code: E110-0000
• Description: Scanner Motor error
• Causes: Error in the initial operation of the Scanner Motor
• Remedy: 1. Check the connector of the Laser Scanner Unit. 2. Replace the Laser Scanner Unit. 3. Replace the DC Controller PCB.

• Code: E110-0001
• Description: Scanner Motor error
• Causes: Error in rotation of the Scanner Motor
• Remedy: 1. Check the connector between the Laser Scanner Unit and the DC Controller PCB. 2. Replace the Laser Scanner Unit. 3. Replace the DC Controller PCB.

• Code: E196-0000
• Description: Firmware error (The host machine or the option cassette)
• Causes: Engine firmware error
• Remedy: 1. Turn OFF and then ON the power. 2. Update firmware. 3. Replace the DC Controller PCB

• Code: E196-0002
• Description: DC Controller internal error
• Causes: The memory area in the DC Controller cannot be accessed.
• Remedy: 1. Turn OFF and then ON the power. 2. Update firmware. 3. Replace the DC Controller PCB