• Code: E015-0005
• Description: Cassette 5 lift-up error
• Causes: Cassette 5 Lifter Motor error
• Remedy: 1. Check the Cassette 5 Lifter Motor (dropout, gear tooth jump, etc.). 2. Check the connector between the Cassette 5 Lifter Motor and the Cassette 5 Driver PCB. 3. Replace the Cassette 5 Lifter Motor. 4. Replace the Cassette 5 Driver PCB.

• Code: E066-0000
• Description: Environment Sensor error
• Causes: Failure of the Environment Sensor was detected.
• Remedy: 1. Check the connection of the Environment Sensor. 2. Replace the Environment Sensor. 3. Replace the DC Controller PCB.

• Code: E100-0000
• Description: Laser Scanner error
• Causes: Failure of the Laser Scanner Unit
• Remedy: 1. Check the connector of the Laser Scanner Unit. 2. Replace the Laser Scanner Unit. 3. Replace the DC Controller PCB.

• Code: E100-0001
• Description: Laser Scanner error
• Causes: Failure of the Laser Assembly in the Laser Scanner Unit
• Remedy: 1. Check the connector of the Laser Scanner Unit. 2. Replace the Laser Scanner Unit. 3. Replace the DC Controller PCB.

• Code: E110-0000
• Description: Scanner Motor error
• Causes: Error in the initial operation of the Scanner Motor
• Remedy: 1. Check the connector of the Laser Scanner Unit. 2. Replace the Laser Scanner Unit. 3. Replace the DC Controller PCB.

• Code: E196-0001
• Description: Firmware error
• Causes: Engine firmware error
• Remedy: 1. Turn OFF and then ON the power. 2. Update firmware. 3. Replace the DC Controller PCB.

• Code: E196-0002
• Description: DC Controller internal error
• Causes: The memory area in the DC Controller cannot be accessed.
• Remedy: 1. Turn OFF and then ON the power. 2. Update firmware. 3. Replace the DC Controller PCB.

• Code: E196-0003
• Description: Detection of noncompatible DC Controller
• Causes: DC Controller firmware of another model was detected.
• Remedy: 1. Replace the DC Controller with that of this model. 2. Update firmware.