Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iPF760 — Trang 3/39

Code: 1037

Display: GARO W1233
Description: (Setup mode) Required item missing The exit parameter is missing in the EnterGAROMode command and the UniversalExitLanguage command used in Setup mode.
Remedy: 1. Identify the model. 2. If the error has occurred with RIP, try with the printer driver. 3. Try in an alternative environment (I/ F, PC).

Code: 1038

Display: GARO W1234
Description: (Setup mode)Data out of bounds A character string that is not defined as an environmental variable has been detected. An unknown environmental variable has been detected. A character string that is not defined as an environmental variable value has been detected. The value of an unknown environmental variable has been detected.
Remedy: 1. Identify the model. 2. If the error has occurred with RIP, try with the printer driver. 3. Try in an alternative environment (I/ F, PC).

Code: 1039

Display: GARO W1235
Description: (Setup mode) Other warning A character string other than the @PJL prefix has been detected while the analysis module was idle.
Remedy: 1. Identify the model. 2. If the error has occurred with RIP, try with the printer driver. 3. Try in an alternative environment (I/ F, PC).

Code: 103A

Display: GARO W1226
Description: (Image mode) Image processing table error No image processing table is being transmitted, a required image processing table is unavailable, or an image processing table contains a value out of bounds.
Remedy: 1. Retransmit. 2. Check with a different interface choice. 3. Try by printing other data. 4. With RIP, print from the print driver. Supplement: If this error occurs, the print result would appear blank.

Code: 1040

Display: GL2: W0501 The memory is full.
Description: HP/GL2 error; Insufficient memory capacity The size of drawing data exceeds the processing capacity.
Remedy: 1. Reduce the size of rendering data. 2. Replace with HP RTL data for manipulation with On The Fly*. *: On The Fly: The method to transmit data in sequence from paper. The software that generates HP-GL/2 data has this option to specify. Select this option to save the memory usage of the printer.

Code: 1041

Display: GL2: W0502 The parameter is out of range.
Description: HP/GL2 error; invalid parameter Data having an invalid number of types of parameters that follow the command has been detected.
Remedy: Verify the data and fix it.

Code: 1043

Display: GL2: W0504 This command is not supported.
Description: HP/GL2 error; Invalid command A command that is not defined in HP-GL/2 or HP RTL is included.
Remedy: Verify the data and fix it.

Code: 1047

Display: GL2: W0903 The memory is full.
Description: HP/GL2 error; replot buffer overflow Data storage buffers have run short.
Remedy: 1. Reduce the size of rendering data. 2. Replace with HP RTL data for manipulation with On The Fly*. *: On The Fly: The method to transmit data in sequence from paper. The software that generates HP-GL/2 data has this option to specify. Select this option to save the memory usage of the printer.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie