Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iPF760 — Trang 2/39

Code: 1021

Display: Papr Type Mismatch
Description: Paper mismatch (type) With [Warning Indication] is selected for [Paper Mismatch Detection], the type of loaded paper mismatches the specified type. Or, with [Pause] is selected for [Paper Mismatch Detection], the [Online] button was pressed to execute forced printing.
Remedy: Continued printing is allowed. Check driver setting. Replace with appropriate paper.

Code: 1022

Display: Papr Type Mismatch
Description: Paper mismatch (type) With [Warning Indication] is selected for [Paper Mismatch Detection], the type of loaded paper mismatches the specified type. Or, with [Pause] is selected for [Paper Mismatch Detection], the [Online] button was pressed to execute forced printing.
Remedy: Continued printing is allowed. Check driver setting. Replace with appropriate paper.

Code: 1030

Display: GARO W1221
Description: (Image mode)Unknown command A character that is located within bounds of a group character or end parameter character but that is not defined as a command has been detected during Image mode command decoding.
Remedy: 1. Identify the model. 2. If the error has occurred with RIP, try with the printer driver. 3. Try in an alternative environment (I/ F, PC).

Code: 1031

Display: GARO W1222
Description: (Image mode) Invalid parameter count (no parameters) A numeric field has not been identified as being numeric during Image mode command decoding.
Remedy: 1. Identify the model. 2. If the error has occurred with RIP, try with the printer driver. 3. Try in an alternative environment (I/ F, PC).

Code: 1032

Display: GARO W1223
Description: (Image mode) Required item missing A character out of bounds has been detected where a group or end parameter character ought to exist, during Image mode command decoding.
Remedy: 1. Identify the model. 2. If the error has occurred with RIP, try with the printer driver. 3. Try in an alternative environment (I/ F, PC).

Code: 1034

Display: GARO W1225
Description: (Image mode)Other warning A character other than <ESC> has been detected right after the image mode analysis module entered Image mode or when the decoding of a single command ended.
Remedy: 1. Identify the model. 2. If the error has occurred with RIP, try with the printer driver. 3. Try in an alternative environment (I/ F, PC).

Code: 1035

Display: GARO W1231
Description: (Setup mode)Unknown command A command character string other than RESET, SET, OPCMT0 and OPCMT2 has been detected in a PJL command.
Remedy: 1. Identify the model. 2. If the error has occurred with RIP, try with the printer driver. 3. Try in an alternative environment (I/ F, PC).

Code: 1036

Display: GARO W1232
Description: (Setup mode)Invalid parameter count Too many or too few parameters have been detected during Setup mode command decoding.
Remedy: 1. Identify the model. 2. If the error has occurred with RIP, try with the printer driver. 3. Try in an alternative environment (I/ F, PC).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie