Description: While printing, paper width was detected to have fluctuated beyond the predefined value. Failure of detecting right edge of the paper (cut paper, in printing).
Remedy: By releasing the release lever, move to the loading sequence, and load paper to the correct position.
Display: Paper jam Remove the paper after cutting at the top of feed slot. Push the release lever back.
Description: While printing, paper width was detected to have fluctuated beyond the predefined value. Failure of detecting right edge of the paper (cut paper, in printing).
Remedy: 1. Cut the paper near the feed slot, and remove the paper. 2. Release the release lever, and load the paper to the correct position.
Display: Borderless printng not possible. Lift the release lever and reload the paper. Online: Print
Description: Invalid paper loading position (borderless printing) The position at which paper is loaded is unfit for borderless printing. Data with a borderless print specification has been received while the left or right edge of roll paper was off the center of the borderless print idle ejection port at the completion of roll paper pickup.
Display: Borderless printng not possible. Check paper size setting. Online: Print Load/Eject: Change Paper
Description: Borderless print data not printable (logic) Borderless print data was received at the start of printing and one or more of the following requirements are met at the same time: -A feeder slot other than one for roll paper has been specified in the data. -A paper type that does not support borderless printing has been set on the data. -Banner printing has been specified on the data at the same time. -A paper size that does not support borderless printing has been specified in a job for which paper had already been fed.
Display: Borderless printng not possible. Paper stretched or shrank. Confirm usage cond. of the paper.
Description: It occurs when all of the following conditions are met at start of printing. -Borderless printing data has been received. -Roll paper has been loaded, and its paper width and edge position recognized at loading are within the supported range of borderless printing. -As a result of right/left side edge detection after start of print processing, it was detected as beyond the supported range of borderless printing.
Remedy: Reset /replace the roll paper. Confirm and explain usage environment.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.