Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 400i — Trang 9/20

Code: E575-0002

Description: Gripper Motor (M7) error
The Gripper failed to be detected by the Gripper HP Sensor (S7) although the Gripper Motor (M7) was driven for specified times (1.7 seconds at initialization or 1.4 seconds at normal operation).
Remedy: 1. Check the connector connection of the Gripper HP Sensor (S7) or the Gripper Motor (M7).
2. Replace the Gripper HP Sensor (S7).
3. Replace the Gripper Motor (M7).
4. Replace the Finisher Controller PCB (PCB1).

Code: E575-0004

Description: Gripper Motor (M7) clock error
When the Gripper Motor (M7) was driven, the Gripper Encoder Sensor (S8) detected the rotation of 400 clocks or more.
Remedy: 1. Check the connector connection of the Gripper Encoder Sensor (S8) or the Gripper Motor (M7).
2. Replace the Gripper Encoder Sensor (S8).
3. Replace the Gripper Motor (M7).
4. Replace the Finisher Controller PCB (PCB1).

Code: E577-0001

Description: Paddle Motor (M3) error
The Paddle failed to move from the Paddle HP Sensor (S3) although the Paddle Motor (M3) was driven for 175 steps.
Remedy: 1. Check the connector connection of the Paddle HP Sensor (S3) or the Paddle Motor (M3).
2. Replace the Paddle HP Sensor (S3).
3. Replace the Paddle Motor (M3).
4. Replace the Finisher Controller PCB (PCB1).

Code: E577-0002

Description: Paddle Motor (M3) error
The Paddle failed to be detected by the Paddle HP Sensor (S3) although the Paddle Motor (M3) was driven for 2.0 seconds.
Remedy: 1. Check the connector connection of the Paddle HP Sensor (S3) or the Paddle Motor (M3).
2. Replace the Paddle HP Sensor (S3).
3. Replace the Paddle Motor (M3).
4. Replace the Finisher Controller PCB (PCB1).

Code: E583-0001

Description: Tray Auxiliary Guide Motor (M6) error
The Tray Auxiliary Guide failed to move from the Tray Auxiliary Guide HP Sensor (S6) although the Tray Auxiliary Guide Motor (M6) was driven for 30mm.
Remedy: 1. Check the connector connection of the Tray Auxiliary Guide HP Sensor (S6) or the Tray Auxiliary Guide Motor (M6).
2. Replace the Tray Auxiliary Guide HP Sensor (S6).
3. Replace the Tray Auxiliary Guide Motor (M6).
4. Replace the Finisher Controller PCB (PCB1).

Code: E583-0002

Description: Tray Auxiliary Guide Motor (M6) error
The Tray Auxiliary Guide failed to be detected by the Tray Auxiliary Guide HP Sensor (S6) although the Tray Auxiliary Guide Motor (M6) was driven for 1.8 seconds
Remedy: 1. Check the connector connection of the Tray Auxiliary Guide HP Sensor (S6) or the Tray Auxiliary Guide Motor (M6).
2. Replace the Tray Auxiliary Guide HP Sensor (S6).
3. Replace the Tray Auxiliary Guide Motor (M6).
4. Replace the Finisher Controller PCB (PCB1).

Code: E602

Description: File system error on the HDD
Remedy:

Code: E604-0512

Description: Image memory is faulty or insufficient
512MB memory needs to be installed (insufficient memory for the model)
Remedy: 1. Install a 512MB or larger main memory
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie