• Code: E5F2-8002
• Description: Error in the Saddle Roller Guide Motor (Finisher-D1). The saddle roller guide does not come off the Saddle Roller Guide HP Sensor when the Saddle Roller Guide Motor has been driven for 50 pulses.
• Remedy: 1. The connector of the Saddle Roller Guide HP Sensor (S207) or the Saddle Roller Guide Motor (M204) are disconnected. 2. The wiring of the Saddle Roller Guide HP Sensor (S207) or the Saddle Roller Guide Motor (M204) are faulty. 3. The Saddle Roller Guide HP Sensor (S207) is faulty. 4. The Saddle Roller Guide Motor (M204) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty.

• Code: E5F3-8001
• Description: Error in the Saddle Alignment Guide Motor (Finisher-D1). The Saddle Alignment Plate HP Sensor does not detect the saddle alignment guide when the saddle alignment guide has been moved for 177 mm by Saddle Alignment Guide Motor.
• Remedy: 1. The connector of the Saddle Alignment Plate HP Sensor (S206) or the Saddle Alignment Guide Motor (M202) are disconnected. 2. The wiring of the Saddle Alignment Plate HP Sensor (S206) or the Saddle Alignment Guide Motor (M202) are faulty. 3. The Saddle Alignment Plate HP Sensor (S206) is faulty. 4. The Saddle Alignment Guide Motor (M202) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty.

• Code: E5F3-8002
• Description: Error in the Saddle Alignment Guide Motor (Finisher-D1). The saddle alignment guide does not come off the Saddle Alignment Plate HP Sensor when the Saddle Alignment Guide Motor has been driven for 50 pulses.
• Remedy: 1. The connector of the Saddle Alignment Plate HP Sensor (S206) or the Saddle Alignment Guide Motor (M202) are disconnected. 2. The wiring of the Saddle Alignment Plate HP Sensor (S206) or the Saddle Alignment Guide Motor (M202) are faulty. 3. The Saddle Alignment Plate HP Sensor (S206) is faulty. 4. The Saddle Alignment Guide Motor (M202) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty.

• Code: E5F4-8001
• Description: Error in the Saddle Stitcher Motor (Finisher-D1). The Saddle Stitcher HP Sensor does not detect the saddle stitcher unit when the Saddle Stitcher Motor has been driven for 480 msec.
• Remedy: 1. The connector of the Saddle Stitcher HP Sensor (S223) or the Saddle Stitcher Motor (M209) are disconnected. 2. The wiring of the Saddle Stitcher HP Sensor (S223) or the Saddle Stitcher Motor (M209) are faulty. 3. The Saddle Stitcher HP Sensor (S223) is faulty. 4. The Saddle Stitcher Motor (M209) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty.

• Code: E5F4-8002
• Description: Error in the Saddle Stitcher Motor (Finisher-D1). The Saddle Stitcher unit does not come off the Saddle Stitcher HP Sensor when the Saddle Stitcher Motor has been driven for 480msec.
• Remedy: 1. The connector of the Saddle Stitcher HP Sensor (S223) or the Saddle Stitcher Motor (M209) are disconnected. 2. The wiring of the Saddle Stitcher HP Sensor (S223) or the Saddle Stitcher Motor (M209) are faulty. 3. The Saddle Stitcher HP Sensor (S223) is faulty. 4. The Saddle Stitcher Motor (M209) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty.

• Code: E5F5-8001
• Description: Error in the Saddle Trailing Edge Retainer Motor (Finisher-D1). The Saddle Trailing Edge Retainer Move HP Sensor does not detect the saddle trailing edge retainer when the saddle trailing edge retainer has been moved for 96 mm by Saddle Trailing Edge Retainer Motor.
• Remedy: 1. The connector of the Saddle Trailing Edge Retainer Move HP Sensor (S219) or the Saddle Trailing Edge Retainer Motor (M210) are disconnected. 2. The wiring of the Saddle Trailing Edge Retainer Move HP Sensor (S219) or the Saddle Trailing Edge Retainer Motor (M210) are faulty. 3. The Saddle Trailing Edge Retainer Move HP Sensor (S219) is faulty. 4. The Saddle Trailing Edge Retainer Motor (M210) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty.

• Code: E5F5-8002
• Description: Error in the Saddle Trailing Edge Retainer Motor (Finisher-D1). The Saddle trailing edge retainer does not come off the Saddle Trailing Edge Retainer Move HP Sensor when the Saddle Trailing Edge Retainer Motor has been driven for 50 pulses.
• Remedy: 1. The connector of the Saddle Trailing Edge Retainer Move HP Sensor (S219) or the Saddle Trailing Edge Retainer Motor (M210) are disconnected. 2. The wiring of the Saddle Trailing Edge Retainer Move HP Sensor (S219) or the Saddle Trailing Edge Retainer Motor (M210) are faulty. 3. The Saddle Trailing Edge Retainer Move HP Sensor (S219) is faulty. 4. The Saddle Trailing Edge Retainer Motor (M210) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty.

• Code: E5F6-8001
• Description: Error in the Saddle Paper Push-on Plate Motor (Finisher-D1). The Saddle Paper Push-on Plate HP Sensor does not detect the saddle paper push-on plate when the Saddle Paper Pushon Plate Motor has been driven for 500 msec.
• Remedy: 1. The connector of the Saddle Paper Push-on Plate HP Sensor (S218) or the Saddle Paper Push-on Plate Motor (M205) are disconnected. 2. The wiring of the Saddle Paper Push-on Plate HP Sensor (S218) or the Saddle Paper Push-on Plate Motor (M205) are faulty. 3. The Saddle Paper Push-on Plate HP Sensor (S218) is faulty. 4. The Saddle Paper Push-on Plate Motor (M205) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty.