• Code: E602-0001
• Description: Hard disk error. HDD detection error. Unable to detect HDD, not become Ready, return an error. Error, the system of the host machine has not been started normally. Therefore the error code is not recorded in the log.
• Remedy: 1. Connection of the HDD cable. 2. Reinstall the system. 3. HDD. 4. Main Controller PCB.

• Code: E602-0002
• Description: Hard disk error. There is no startup file. There is no program for main CPU in /BOOTDEV/BOOT/ on HDD. Error, the system of the host machine has not been started normally. Therefore the error code is not recorded in the log.
• Remedy: 1. Reinstall the system. 2. HDD.

• Code: E602-0003
• Description: Hard disk error. HDD WriteAbort error. Unable to read /BOOTDEV sector on HDD.
• Remedy: 1. Reinstall the system. 2. HDD.

• Code: E602-0006
• Description: Hard disk error. There is no SubBootable for the PDL type in /BOOTDEV/ BOOT. Error, the system of the host machine has not been started normally. Therefore the error code is not recorded in the log.
• Remedy: 1. Reinstall the system. 2. HDD.

• Code: E602-0009
• Description: Hard disk error. There is no FONT file which is required when executing report print, FAX/IFAX transmission and reception, or stamp print in /BOOTDEV/BOOT.
• Remedy: 1. Reinstall the system. 2. HDD.

• Code: E602-0012
• Description: Hard disk error. The file on HDD in which the Web browser refers to is corrupted or deleted.
• Remedy: 1. Reinstall the system. 2. HDD.

• Code: E602-0100
• Description: Hard disk error. Error in /FSTDEV.
• Remedy: 1. Check the Cable and Power Connector. 2. If the measures above do not solve the problem, start up in Safe Mode to perform All Format using SST and reinstall the system (SYSTEM, LANGUAGE, RUI), and then turn OFF and then ON the main power. 3. If the error still remains, it can be caused by HDD failure; therefore, replace the HDD and reinstall the system.

• Code: E602-0101
• Description: Hard disk error. Error in /FSTDEV.
• Remedy: 1. Check the Cable and Power Connector. 2. If the measures above do not solve the problem, start up in Safe Mode to perform All Format using SST and reinstall the system (SYSTEM, LANGUAGE, RUI), and then turn OFF and then ON the main power. 3. If the error still remains, it can be caused by HDD failure; therefore, replace the HDD and reinstall the system.