0

Các lỗi thường gặp

Code :
  • Code: E5F6-8002
  • Description: Error in the Saddle Paper Push-on Plate Motor (Finisher-D1). The saddle paper push-on plate does not come off the Saddle Paper Push-on Plate HP Sensor when the Saddle Paper Push-on Plate Motor has been driven for 150 msec.
  • Remedy: 1. The connector of the Saddle Paper Push-on Plate HP Sensor (S218) or the Saddle Paper Push-on Plate Motor (M205) are disconnected. 2. The wiring of the Saddle Paper Push-on Plate HP Sensor (S218) or the Saddle Paper Push-on Plate Motor (M205) are faulty. 3. The Saddle Paper Push-on Plate HP Sensor (S218) is faulty. 4. The Saddle Paper Push-on Plate Motor (M205) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty.
  • Code: E5F6-8003
  • Description: Saddle Paper Push-on Plate Motor clock error (Finisher-D1). The drive speed of the Saddle Paper Push-on Plate Motor is less than 6 clocks.
  • Remedy: 1. The connector of the Saddle Paper Push-on Plate Motor Sensor (S213) or the Saddle Paper Push-on Plate Motor (M205) are disconnected. 2. The wiring of the Saddle Paper Push-on Plate Motor Sensor (S213) or the Saddle Paper Push-on Plate Motor (M205) are faulty. 3. The Saddle Paper Push-on Plate Motor Sensor (S213) is faulty. 4. The Saddle Paper Push-on Plate Motor (M205) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty.
  • Code: E5F7-8001
  • Description: Error in the Saddle Trailing Edge Retainer Motor (Finisher-D1). The Saddle Trailing Edge Retainer HP Sensor does not detect the Saddle trailing edge retainer when the Saddle Trailing Edge Retainer Motor has been driven for 80 pulses.
  • Remedy: 1. The connector of the Saddle Trailing Edge Retainer HP Sensor (S221) or the Saddle Trailing Edge Retainer Motor (M210) are disconnected. 2. The wiring of the Saddle Trailing Edge Retainer HP Sensor (S221) or the Saddle Trailing Edge Retainer Motor (M210) are faulty. 3. The Saddle Trailing Edge Retainer HP Sensor (S221) is faulty. 4. The Saddle Trailing Edge Retainer Motor (M210) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty.
  • Code: E5F7-8002
  • Description: Error in the Saddle Trailing Edge Retainer Motor (Finisher-D1). The saddle trailing edge retainer does not come off the Saddle Trailing Edge Retainer HP Sensor when the Saddle Trailing Edge Retainer Motor has been driven for 50 pulses.
  • Remedy: 1. The connector of the Saddle Trailing Edge Retainer HP Sensor (S221) or the Saddle Trailing Edge Retainer Motor (M210) are disconnected. 2. The wiring of the Saddle Trailing Edge Retainer HP Sensor (S221) or the Saddle Trailing Edge Retainer Motor (M210) are faulty. 3. The Saddle Trailing Edge Retainer HP Sensor (S221) is faulty. 4. The Saddle Trailing Edge Retainer Motor (M210) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty.
  • Code: E5F8-8001
  • Description: Error in the Saddle Tapping Motor (Finisher-D1). The Saddle Paper Tapping HP Sensor does not detect the Saddle tapping plate when the Saddle Tapping Motor has been driven for 50 pulses.
  • Remedy: 1. The connector of the Saddle Paper Tapping HP Sensor (S215) or the Saddle Tapping Motor (M213) are disconnected. 2. The wiring of the Saddle Paper Tapping HP Sensor (S215) or the Saddle Tapping Motor (M213) are faulty. 3. The Saddle Paper Tapping HP Sensor (S215) is faulty. 4. The Saddle Tapping Motor (M213) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty.
  • Code: E5F8-8002
  • Description: Error in the Saddle Tapping Motor (Finisher-D1). The saddle tapping plate does not come off the Saddle Paper Tapping HP Sensor when the Saddle Tapping Motor has been driven for 50 pulses.
  • Remedy: 1. The connector of the Saddle Paper Tapping HP Sensor (S215) or the Saddle Tapping Motor (M213) are disconnected. 2. The wiring of the Saddle Paper Tapping HP Sensor (S215) or the Saddle Tapping Motor (M213) are faulty. 3. The Saddle Paper Tapping HP Sensor (S215) is faulty. 4. The Saddle Tapping Motor (M213) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty.
  • Code: E5F9-8001
  • Description: Error in the Saddle Lead-in Roller Disengage Motor (Finisher-D1). The Saddle Lead-in Roller HP Sensor does not detect the Saddle lead-in roller when the Saddle Lead-in Roller Disengage Motor has been driven for 50 pulses.
  • Remedy: 1. The connector of the Saddle Lead-in Roller HP Sensor (S222) or the Saddle Lead-in Roller Disengage Motor (M214) are disconnected. 2. The wiring of the Saddle Lead-in Roller HP Sensor (S222) or the Saddle Lead-in Roller Disengage Motor (M214) are faulty. 3. The Saddle Lead-in Roller HP Sensor (S222) is faulty. 4. The Saddle Lead-in Roller Disengage Motor (M214) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty.
  • Code: E5F9-8002
  • Description: Error in the Saddle Lead-in Roller Disengage Motor (Finisher-D1). The saddle lead-in roller does not come off the Saddle Lead-in Roller HP Sensor when the Saddle Lead-in Roller Disengage Motor has been driven for 50 pulses.
  • Remedy: 1. The connector of the Saddle Lead-in Roller HP Sensor (S222) or the Saddle Lead-in Roller Disengage Motor (M214) are disconnected. 2. The wiring of the Saddle Lead-in Roller HP Sensor (S222) or the Saddle Lead-in Roller Disengage Motor (M214) are faulty. 3. The Saddle Lead-in Roller HP Sensor (S222) is faulty. 4. The Saddle Lead-in Roller Disengage Motor (M214) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty.
‹ First  < 32 33 34 35 36 37 38 >  Last ›
Thêm vào giỏ hàng thành công
popup

Số lượng:

Tổng tiền:

Danh mục