• Code: E530-8000
• Description: Error in the Front or Rear Alignment Motor (Finisher-D1). The Front or Rear Alignment Motor operate abnormally during initialization.
• Remedy: 1. The connector of the Front/Rear Alignment HP Sensor (S108/S109) or the Front/Rear Alignment Motor (M108/ M109) are disconnected. 2. The wiring of the Front/Rear Alignment HP Sensor (S108/ S109) or the Front/Rear Alignment Motor (M108/M109) are faulty. 3. The Front/Rear Alignment HP Sensor (S108/S109) is faulty. 4. The Front/Rear Alignment Motor (M108/M109) is faulty. 5. The Finisher Controller PCB is faulty.

• Code: E530-8001
• Description: Error in the Front Alignment Motor (Finisher-D1). The front alignment plate does not come off the Front Alignment HP Sensor when the Front Alignment Motor has been driven for 4 seconds.
• Remedy: 1. The connector of the Front Alignment HP Sensor (S108) or the Front Alignment Motor (M108) are disconnected. 2. The wiring of the Front Alignment HP Sensor (S108) or the Front Alignment Motor (M108) are faulty. 3. The Front Alignment HP Sensor (S108) is faulty. 4. The Front Alignment Motor (M108) is faulty. 5. The Finisher Controller PCB is faulty.

• Code: E530-8002
• Description: Error in the Front Alignment Motor (Finisher-D1). The Front Alignment HP Sensor does not detect the Front Alignment plate when the Front Alignment Motor has been driven for 4 seconds.
• Remedy: 1. The connector of the Front Alignment HP Sensor (S108) or the Front Alignment Motor (M108) are disconnected. 2. The wiring of the Front Alignment HP Sensor (S108) or the Front Alignment Motor (M108) are faulty. 3. The Front Alignment HP Sensor (S108) is faulty. 4. The Front Alignment Motor (M108) is faulty. 5. The Finisher Controller PCB is faulty.

• Code: E531-8001
• Description: Error in the Staple Motor (Finisher-D1). The staple unit does not come off the Staple HP Sensor when the Staple Motor has been driven for 400 msec.
• Remedy: 1. The connector of the staple unit is disconnected. 2. The wiring of the staple unit is faulty. 3. The staple unit is faulty. 4. The Finisher Controller PCB is faulty.

• Code: E531-8002
• Description: Error in the Staple Motor (Finisher-D1). The Staple HP Sensor does nor detect the staple unit when the Staple Motor has been driven for 400 msec.
• Remedy: 1. The connector of the staple unit is disconnected. 2. The wiring of the staple unit is faulty. 3. The staple unit is faulty. 4. The Finisher Controller PCB is faulty.

• Code: E532-8000
• Description: Error in the Staple Shift Motor (Finisher-D1). The Staple Shift Motor operate abnormally during initialization.
• Remedy: 1. The connector of the Stapler Shift HP Sensor (S107) or the Staple Shift Motor (M107) are disconnected. 2. The wiring of the Stapler Shift HP Sensor (S107) or the Staple Shift Motor (M107) are faulty. 3. The Stapler Shift HP Sensor (S107) is faulty. 4. The Staple Shift Motor (M107) is faulty. 5. The Finisher Controller PCB is faulty.

• Code: E532-8001
• Description: Error in the Staple Shift Motor (Finisher-D1). The staple unit does not come off the Stapler Shift HP Sensor when the Staple Shift Motor has been driven for 5 seconds.
• Remedy: 1. The connector of the Stapler Shift HP Sensor (S107) or the Staple Shift Motor (M107) are disconnected. 2. The wiring of the Stapler Shift HP Sensor (S107) or the Staple Shift Motor (M107) are faulty. 3. The Stapler Shift HP Sensor (S107) is faulty. 4. The Staple Shift Motor (M107) is faulty. 5. The Finisher Controller PCB is faulty.

• Code: E532-8002
• Description: Error in the Staple Shift Motor (Finisher-D1). The Stapler Shift HP Sensor does not detect the staple unit when the Staple Shift Motor has been driven for 5 seconds.
• Remedy: 1. The connector of the Stapler Shift HP Sensor (S107) or the Staple Shift Motor (M107) are disconnected. 2. The wiring of the Stapler Shift HP Sensor (S107) or the Staple Shift Motor (M107) are faulty. 3. The Stapler Shift HP Sensor (S107) is faulty. 4. The Staple Shift Motor (M107) is faulty. 5. The Finisher Controller PCB is faulty.