• Code: E535-0001
• Description: Error in the Swing Guide Motor (Finisher-D1). The swing guide does not come off the Swing Guide HP Sensor when the Swing Guide Motor has been driven for 3 seconds.
• Remedy: 1. The connector of the Swing Guide HP Sensor (S110) or the Swing Guide Motor (M110) are disconnected. 2. The wiring of the Swing Guide HP Sensor (S110) or the Swing Guide Motor (M110) are faulty. 3. The Swing Guide HP Sensor (S110) is faulty. 4. The Swing Guide Motor (M110) is faulty. 5. The Finisher Controller PCB is faulty.

• Code: E535-0002
• Description: Error in the Swing Guide Motor (Finisher-D1). The Swing Guide HP Sensor does not detect the swing guide when the Swing Guide Motor has been driven for 3 seconds.
• Remedy: 1. The connector of the Swing Guide HP Sensor (S110) or the Swing Guide Motor (M110) are disconnected. 2. The wiring of the Swing Guide HP Sensor (S110) or the Swing Guide Motor (M110) are faulty. 3. The Swing Guide HP Sensor (S110) is faulty. 4. The Swing Guide Motor (M110) is faulty. 5. The Finisher Controller PCB is faulty.

• Code: E535-0003
• Description: Error in the Swing Guide Motor (Finisher-D1). The Swing Guide Height Detection Sensor failed to be ON even though specified period of time has passed when lowering the swing guide.
• Remedy: 1. The connector of the Swing Guide Height Detection Sensor (S118) or the Swing Guide Motor (M110) are disconnected. 2. The wiring of the Swing Guide Height Detection Sensor (S118) or the Swing Guide Motor (M110) are faulty. 3. The Swing Guide Height Detection Sensor (S118) is faulty. 4. The Swing Guide Motor (M110) is faulty. 5. The Finisher Controller PCB is faulty.

• Code: E535-0004
• Description: Error in the Swing Guide Motor (Finisher-D1). The Swing Guide Height Detection Sensor failed to be OFF even though specified period of time has passed when raising the swing unit.
• Remedy: 1. The connector of the Swing Guide Height Detection Sensor (S118) or the Swing Guide Motor (M110) are disconnected. 2. The wiring of the Swing Guide Height Detection Sensor (S118) or the Swing Guide Motor (M110) are faulty. 3. The Swing Guide Height Detection Sensor (S118) is faulty. 4. The Swing Guide Motor (M110) is faulty. 5. The Finisher Controller PCB is faulty.

• Code: E537-8001
• Description: Error in the Rear Alignment Motor (Finisher-D1). The rear alignment plate does not come off the Rear Alignment HP Sensor when the Rear Alignment Motor has been driven for 4 seconds.
• Remedy: 1. The connector of the Rear Alignment HP Sensor (S109) or the Rear Alignment Motor (M109) are disconnected. 2. The wiring of the Rear Alignment HP Sensor (S109) or the Rear Alignment Motor (M109) are faulty. 3. The Rear Alignment HP Sensor (S109) is faulty. 4. The Rear Alignment Motor (M109) is faulty. 5. The Finisher Controller PCB is faulty.

• Code: E537-8002
• Description: Error in the Rear Alignment Motor (Finisher-D1). The Rear Alignment HP Sensor does not detect the rear alignment plate when the Rear Alignment Motor has been driven for 4 seconds.
• Remedy: 1. The connector of the Rear Alignment HP Sensor (S109) or the Rear Alignment Motor (M109) are disconnected. 2. The wiring of the Rear Alignment HP Sensor (S109) or the Rear Alignment Motor (M109) are faulty. 3. The Rear Alignment HP Sensor (S109) is faulty. 4. The Rear Alignment Motor (M109) is faulty. 5. The Finisher Controller PCB is faulty.

• Code: E540-8001
• Description: Tray 1 time out error (Finisher-D1). 1. The tray 1 does not return to home position when the Tray 1 Shift Motor has been driven for 20 seconds. 2. The tray 1 does not come off the Tray 1 Area Sensor at the same area when the Tray 1 Shift Motor has been driven for 4 seconds.
• Remedy: 1. The connectors of the Tray 1 Area Sensors (S122/S123/ S124) or the Tray 1 Shift Motor (M105) are disconnected. 2. The wiring of the Tray 1 Area Sensors (S122/S123/S124) or the Tray 1 Shift Motor (M105) are faulty. 3. The Tray 1 Area Sensors (S122/S123/S124) is faulty. 4. The Tray 1 Shift Motor (M105) is faulty. 5. The Finisher Controller PCB is faulty.

• Code: E540-8002
• Description: Tray 1 area error (Finisher-D1). The tray 1 detects the discontinuous area with the Tray 1 Area Sensors.
• Remedy: 1. The connectors of the Tray 1 Area Sensors (S122/S123/ S124) or the Tray 1 Shift Motor (M105) are disconnected. 2. The wiring of the Tray 1 Area Sensors (S122/S123/S124) or the Tray 1 Shift Motor (M105) are faulty. 3. The Tray 1 Area Sensors (S122/S123/S124) is faulty. 4. The Tray 1 Shift Motor (M105) is faulty. 5. The Finisher Controller PCB is faulty.