• Code: E5BA-8012
• Description: Error in the Rear Estrangement Motor (Finisher-D1). The Rear Estrangement Motor HP Sensor does not turn OFF when the Rear Estrangement Motor has been driven for 537 msec.
• Remedy: 1. The connector of the Rear Estrangement Motor HP Sensor (S104) or the Rear Estrangement Motor (M104) are disconnected. 2. The wiring of the Rear Estrangement Motor HP Sensor (S104) or the Rear Estrangement Motor (M104) are faulty. 3. The Rear Estrangement Motor HP Sensor (S104) is faulty. 4. The Rear Estrangement Motor (M104) is faulty. 5. The Trimmer Controller PCB (PCB1) is faulty.

• Code: E5BB-8001
• Description: Error in the Waste Paper Full Sensor (Finisher-D1). The A/D input value does not enter into the D/A output upper limit of the Waste Paper Full Sensor.
• Remedy: 1. The connector of the Waste Paper Full Sensor (emitting/ receiving) (S011) is disconnected. 2. The wire of the Waste Paper Full Sensor (emitting/ receiving) (S011) is faulty. 3. The Waste Paper Full Sensor (emitting/receiving) (S011) is faulty. 4. The Trimmer Controller PCB (PCB1) is faulty.

• Code: E5BB-8002
• Description: Error in the Waste Paper Full Sensor (Finisher-D1). The A/D input value does not enter into the D/A output lower limit of the Waste Paper Full Sensor.
• Remedy: 1. The connector of the Waste Paper Full Sensor (emitting/ receiving) (S011) is disconnected. 2. The wire of the Waste Paper Full Sensor (emitting/ receiving) (S011) is faulty. 3. The Waste Paper Full Sensor (emitting/receiving) (S011) is faulty. 4. The Trimmer Controller PCB (PCB1) is faulty.

• Code: E5F0-8001
• Description: Error in the Saddle Lead Edge Stopper Motor (Finisher-D1). The Saddle Lead Edge Stopper HP Sensor does not detect the Saddle lead edge stopper when the Saddle lead edge stopper has been moved for 182 mm by Saddle Lead Edge Stopper Motor.
• Remedy: 1. The connector of the Saddle Lead Edge Stopper HP Sensor (S205) or the Saddle Lead Edge Stopper Motor (M203) are disconnected. 2. The wiring of the Saddle Lead Edge Stopper HP Sensor (S205) or the Saddle Lead Edge Stopper Motor (M203) are faulty. 3. The Saddle Lead Edge Stopper HP Sensor (S205) is faulty. 4. The Saddle Lead Edge Stopper Motor (M203) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty.

• Code: E5F0-8002
• Description: Error in the Saddle Lead Edge Stopper Motor (Finisher-D1). The Saddle lead edge stopper does not come off the Saddle Lead Edge Stopper HP Sensor when the Saddle Lead Edge Stopper Motor has been driven for 50 pulses.
• Remedy: 1. The connector of the Saddle Lead Edge Stopper HP Sensor (S205) or the Saddle Lead Edge Stopper Motor (M203) are disconnected. 2. The wiring of the Saddle Lead Edge Stopper HP Sensor (S205) or the Saddle Lead Edge Stopper Motor (M203) are faulty. 3. The Saddle Lead Edge Stopper HP Sensor (S205) is faulty. 4. The Saddle Lead Edge Stopper Motor (M203) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty.

• Code: E5F1-8001
• Description: Saddle folder/feeder clock error (Finisher-D1). The drive speed of the Saddle Folder/Feeder Motor is less than 5 mm/sec.
• Remedy: 1. The connector of the Saddle Folder/Feeder Motor Sensor (S214) or the Saddle Folder/Feeder Motor (M206) are disconnected. 2. The wiring of the Saddle Folder/Feeder Motor Sensor (S214) or the Saddle Folder/Feeder Motor (M206) are faulty. 3. The Saddle Folder/Feeder Motor Sensor (S214) is faulty. 4. The Saddle Folder/Feeder Motor (M206) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty.

• Code: E5F1-8002
• Description: Error in the Saddle Folder/Feeder Motor (Finisher-D1). The Saddle Folder HP Sensor does not detect the home position of the paper fold roller during initialization.
• Remedy: 1. The connector of the Saddle Folder HP Sensor (S229) or the Saddle Folder/Feeder Motor (M206) are disconnected. 2. The wiring of the Saddle Folder HP Sensor (S229) or the Saddle Folder/Feeder Motor (M206) are faulty. 3. The Saddle Folder HP Sensor (S229) is faulty. 4. The Saddle Folder/Feeder Motor (M206) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty.

• Code: E5F2-8001
• Description: Error in the Saddle Roller Guide Motor (Finisher-D1). The Saddle Roller Guide HP Sensor does not detect the Saddle roller guide when the saddle roller guide has been moved for 20 mm by Saddle Roller Guide Motor.
• Remedy: 1. The connector of the Saddle Roller Guide HP Sensor (S207) or the Saddle Roller Guide Motor (M204) are disconnected. 2. The wiring of the Saddle Roller Guide HP Sensor (S207) or the Saddle Roller Guide Motor (M204) are faulty. 3. The Saddle Roller Guide HP Sensor (S207) is faulty. 4. The Saddle Roller Guide Motor (M204) is faulty. 5. The Saddle Stitcher Controller PCB is faulty. 6. The Finisher Controller PCB is faulty