Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 8285 Pro — Trang 5/54

Code: E023-0002

Description: Error in Magnet Roller Clutch connection detection. Connection of the Magnet Roller Clutch (CL5) cannot be detected 5 times with 20 msec time interval.
Remedy: 1. Check the connection of the Magnet Roller Clutch (CL5). Sensor side: J2006, Main Driver PCB (PCB2) side: J109 2. Replace the Magnet Roller Clutch (CL5). 3. Replace the Main Driver PCB (PCB2). 4. Replace the DC Controller PCB (PCB1).

Code: E025-0001

Description: Toner Feed Motor error. Overcurrent of the Toner Feed Motor (M28) was detected.
Remedy: 1. Check the connection of the Connector. Motor side: J2036, Buffer Unit relay: J3124, Front side relay: J3090, Rear side relay: J3091, Main Driver PCB (PCB2) side: J115 2. Replace the Toner Feed Motor (M28). 3. Check if toner is clogged inside of the Buffer. Turn the Drive Shaft of the Motor with your hand to check it. If the load is too much, inside of the Buffer may be clogged, so clean inside of it. 4. Replace the Main Driver PCB (PCB2). 5. Replace the DC Controller PCB (PCB1).

Code: E027-0001

Description: Toner Supply Motor error. Lock error of the Toner Supply Motor (M10).
Remedy: 1. Check the connection of the Connector. Motor side: J2037, Front side relay: J3080, Rear side relay: J3063, Main Driver PCB (PCB2) side: J117 2. Remove the Toner Container, and check if an error occurs. If an error does not occur, reinstall the Toner Container and check again. If an error occurs, check the driving area of connection point of the container. If an error occurs, go on to 3. 3. Replace the Toner Supply Motor (M10). 4. Replace the Main Driver PCB (PCB2). 5. Replace the DC Controller PCB (PCB1).

Code: E032-0001

Description: Failure of NE Controller Counter. Detection of open circuit of count pulse signal.
Remedy: Disconnection of cable.

Code: E041-0001

Description: Right Deck Lifter Motor error. Overcurrent of the Right Deck Lifter Motor was detected.
Remedy: 1. Check for displacement of the Lifter Wire of the Right Deck. 2. Check for hindrance to smooth movement of the Deck Base Plate of the Right Deck

Code: E041-0002

Description: Left Deck Lifter Motor error. Overcurrent of the Left Deck Lifter Motor was detected.
Remedy: 1. Check for displacement of the Lifter Wire of the Left Deck. 2. Check for hindrance to smooth movement of the Deck Base Plate of the Left Deck.

Code: E041-0003

Description: Cassette 3 Lifter Motor error. Overcurrent of the Cassette 3 Lifter Motor was detected.
Remedy: 1. Check for error around the Lifter of the Cassette 3. 2. Check for hindrance to smooth movement of the Cassette Base Plate of the Cassette 3.

Code: E041-0004

Description: Cassette 4 Lifter Motor error. Overcurrent of the Cassette 4 Lifter Motor was detected.
Remedy: 1. Check for error around the Lifter of the Cassette 4. 2. Check for hindrance to smooth movement of the Cassette Base Plate of the Cassette 4.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie