• Code: E711-0002
• Description: IPC communication error (reception timeout) Communication between the host machine and the Finisher was lost.
• Remedy: 1. Check the cable connection. Check the connection between DCON side (J462) and Finisher Lattice side (J9043) Finisher Cable 2. Replace the DC Controller PCB.

• Code: E711-0004
• Description: IPC communication error (checksum error). Communication between the host machine and the Finisher was lost.
• Remedy: 1. Check the cable connection. Check the connection between DCON side (J462) and Finisher Lattice side (J9043) Finisher Cable 2. Replace the DC Controller PCB.

• Code: E711-0020
• Description: IPC communication error (recovery error). Communication between the host machine and the Finisher was lost.
• Remedy: 1. Check the cable connection. Check the connection between DCON side (J462) and Finisher Lattice side (J9043) Finisher Cable 2. Replace the DC Controller PCB.

• Code: E711-0040
• Description: IPC communication error (serial error). Communication between the host machine and the Finisher was lost
• Remedy: 1. Check the cable connection. Check the connection between DCON side (J462) and Finisher Lattice side (J9043) Finisher Cable 2. Replace the DC Controller PCB.

• Code: E713-0001
• Description: Finisher IPC communication error (retransmission request reception error). Communication between the host machine and the Finisher was lost.
• Remedy: 1. Check the cable connection of the Finisher. DC Controller side: J462, Finisher Lattice side: J9043 2. Replace the Finisher Controller PCB.

• Code: E713-0002
• Description: Finisher IPC communication error (reception timeout). Communication between the host machine and the Finisher was lost.
• Remedy: 1. Check the cable connection of the Finisher. DC Controller side: J462, Finisher Lattice side: J9043 2. Replace the Finisher Controller PCB.

• Code: E713-0004
• Description: Finisher IPC communication error (checksum error). Communication between the host machine and the Finisher was lost.
• Remedy: 1. Check the cable connection of the Finisher. DC Controller side: J462, Finisher Lattice side: J9043 2. Replace the Finisher Controller PCB.

• Code: E713-0020
• Description: Finisher IPC communication error (recovery error). Communication between the host machine and the Finisher was lost.
• Remedy: 1. Check the cable connection of the Finisher. DC Controller side: J462, Finisher Lattice side: J9043 2. Replace the Finisher Controller PCB.