Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C355i — Trang 32/44

Code: E615-0001-00

Description: Error in self-diagnosis of the encryption module
Causes: An error was detected in self-diagnosis of the encryption library.
Remedy: [Remedy] Perform the following in the order while checking whether the error is cleared. - Reinstall the necessary application software and restore the backup data once the error is cleared. 1. After reinstalling the system software using SST or a USB flash drive, turn OFF and then ON the main power. 2. Obtain the necessary backup data by referring to the backup data list. 3. Enter safe mode using (2+8) startup, and execute [4] Clear/Format> [2] Flash Format (Flash format) using a USB flash drive. 4. After replacing the Flash PCB, reinstall the system software using SST or a USB flash drive. [Reference] For backup and restoration, refer to "Adjustment> Main Controller System" and "Appendix> Backup Data List" in the Service Manual.

Code: E674-0001-07

Description: Fax Board communication error
Causes: An error was detected for the specified number of times in communication with the Fax Board.
Remedy: [Related parts] R1.00 - Harness between the Fax Board and the Main Controller PCB - Fax Board - Main Controller PCB [Remedy] Check/replace the related harness/cable, connector and parts.

Code: E674-0002-07

Description: Fax Board communication error
Causes: An error was detected for the specified number of times in communication with the Fax Board.
Remedy: [Related parts] R1.00 - Harness between the Fax Board and the Main Controller PCB - Fax Board - Main Controller PCB [Remedy] Check/replace the related harness/cable, connector and parts.

Code: E674-0004-07

Description: Fax Board communication error
Causes: A communication error occurred when accessing the modem IC used for fax.
Remedy: [Related parts] R1.00 - Harness between the Fax Board and the Main Controller PCB - Fax Board - Main Controller PCB [Remedy] Check/replace the related harness/cable, connector and parts.

Code: E674-0008-07

Description: Fax Board communication error
Causes: A communication error occurred when accessing the port IC used for fax.
Remedy: [Related parts] R1.00 - Harness between the Fax Board and the Main Controller PCB - Fax Board - Main Controller PCB [Remedy] Check/replace the related harness/cable, connector and parts.

Code: E674-0010-07

Description: Fax Board communication error
Causes: A communication error occurred when opening the Timer Device used for fax.
Remedy: Check/replace the Main Controller PCB

Code: E674-0011-07

Description: Fax Board communication error
Causes: A communication error occurred when starting the Timer Device used for fax.
Remedy: Check/replace the Main Controller PCB

Code: E674-0020-07

Description: Fax Board communication error
Causes: An error occurred in the modem IC used for fax.
Remedy: [Related parts] R1.00 - Harness between the Fax Board and the Main Controller PCB - Fax Board - Main Controller PCB [Remedy] Check/replace the related harness/cable, connector and parts.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie