Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C7270i — Trang 54/75

Code: E5BA-8001

Description: Error in the front estrangement motor (Finisher-K1). The front estrangement motor HP sensor does not turn ON when the front estrangement motor has been driven for 0.191 second.
Remedy: 1. The connector of the front estrangement motor HP sensor (S102) or the front estrangement motor (M103) are disconnected. 2. The wiring of the front estrangement motor HP sensor/ the front estrangement motor are faulty. 3. The front estrangement motor HP sensor is faulty. 4. The front estrangement motor is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

Code: E5BA-8002

Description: Error in the front estrangement motor (Finisher-K1). The front estrangement motor HP sensor does not turn OFF when the front estrangement motor has been driven for 0.724 second after the front estrangement motor HP sensor has turned ON.
Remedy: 1. The connector of the front estrangement motor HP sensor (S102) or the front estrangement motor (M103) are disconnected. 2. The wiring of the front estrangement motor HP sensor/ the front estrangement motor are faulty. 3. The front estrangement motor HP sensor is faulty. 4. The front estrangement motor is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

Code: E5BA-8011

Description: Error in the rear estrangement motor (Finisher-K1). The rear estrangement motor HP sensor does not turn ON when the rear estrangement motor has been driven for 0.18 second.
Remedy: 1. The connector of the rear estrangement motor HP sensor (S104) or the rear estrangement motor (M104) are disconnected. 2. The wiring of the rear estrangement motor HP sensor/ the rear estrangement motor are faulty. 3. The rear estrangement motor HP sensor is faulty. 4. The rear estrangement motor is faulty. 5. The trimmer controller PCB (PCB1) is faulty

Code: E5BA-8012

Description: Error in the rear estrangement motor (Finisher-K1). The rear estrangement motor HP sensor does not turn OFF when the rear estrangement motor has been driven for 0.537 second.
Remedy: 1. The connector of the rear estrangement motor HP sensor (S104) or the rear estrangement motor (M104) are disconnected. 2. The wiring of the rear estrangement motor HP sensor/ the rear estrangement motor are faulty. 3. The rear estrangement motor HP sensor is faulty. 4. The rear estrangement motor is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

Code: E5BB-8001

Description: Error in the waste paper full sensor (Finisher-K1). The A/D input value does not enter into the D/A output upper limit of the waste paper full sensor
Remedy: 1. The connector of the waste paper full sensor (emitting/ receiving) (S011) is disconnected. 2. The wire of the waste paper full sensor is faulty. 3. The waste paper full sensor is faulty. 4. The trimmer controller PCB (PCB1) is faulty.

Code: E5BB-8002

Description: Error in the waste paper full sensor (Finisher-K1). The A/D input value does not enter into the D/A output lower limit of the waste paper full sensor.
Remedy: 1. The connector of the waste paper full sensor (emitting/ receiving) (S011) is disconnected. 2. The wire of the waste paper full sensor is faulty. 3. The waste paper full sensor is faulty. 4. The trimmer controller PCB (PCB1) is faulty

Code: E5E1-0001

Description: Tray lift motor of paper folding unit failed to go through HP (Document Insertion Unit). The paper feed sensor (S3) did not turned ON when the inserter paper feed tray moved up.
Remedy: 1. Connector of the motor (M2) is disconnected 2. Upper stopper motor is faulty 3. Connector of the Paper feed sensor (S3) is disconnected 4. Paper feed sensor is faulty

Code: E5E1-0002

Description: Tray lift motor of paper folding unit failed to return to HP (Document Insertion Unit). During initialization or lowering of the inserter paper feed tray, the tray lower limit sensor (S5) has not turned ON within the specified pulses.
Remedy: 1. The connector of the tray lift motor (M2) is disconnected. 2. The tray lift motor is faulty. 3. The connector of the tray lower limit sensor (S5) is disconnected. 4. The tray lower limit sensor is faulty.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie