0

Các lỗi thường gặp

Code :
  • Code: E5F3-8001
  • Description: A. Error in the saddle alignment guide motor (Finisher-K1) B. Aligning plate home position error (Finisher-L1). A. The saddle alignment plate HP sensor does not detect the saddle alignment guide when the saddle alignment guide has been moved for 177 mm by saddle alignment guide motor. B. The aligning plate home position sensor does not turn ON when the aligning plate motor has been driven for 500 pulses.
  • Remedy: A: A-1. The connector of the saddle alignment plate HP sensor (S206) or the saddle alignment guide motor (M202) are disconnected. A-2. The wiring of the saddle alignment plate HP sensor/the saddle alignment guide motor are faulty. A-3. The saddle alignment plate HP sensor is faulty. A-4. The saddle alignment guide motor is faulty. A-5. The saddle stitcher controller PCB is faulty. A-6. The finisher controller PCB is faulty. B: B-1. The aligning plate home position sensor (PI5) is faulty. B-2. The aligning plate drive mechanism is faulty. B-3. The aligning motor (M5) is faulty. B-4. The saddle stitcher controller PCB is faulty.
  • Code: E5F3-8002
  • Description: A. Error in the saddle alignment guide motor (Finisher-K1) B. Aligning plate home position error (Finisher-L1). A. The saddle alignment guide does not come off the saddle alignment plate HP sensor when the saddle alignment guide motor has been driven for 50 pulses. B. The aligning plate home position sensor does not turn OFF when the aligning plate motor has been driven for 50 pulses.
  • Remedy: A: A-1. The connector of the saddle alignment plate HP sensor (S206) or the saddle alignment guide motor (M202) are disconnected. A-2. The wiring of the saddle alignment plate HP sensor/the saddle alignment guide motor are faulty. A-3. The saddle alignment plate HP sensor is faulty. A-4. The saddle alignment guide motor is faulty. A-5. The saddle stitcher controller PCB is faulty. A-6. The finisher controller PCB is faulty. B: B-1. The aligning plate home position sensor (PI5) is faulty. B-2. The aligning plate drive mechanism is faulty. B-3. The aligning motor (M5) is faulty. B-4. The saddle stitcher controller PCB is faulty.
  • Code: E5F4-8001
  • Description: A. Error in the saddle stitcher motor (Finisher-K1) B. Stitcher (rear) home position error (Finisher-L1). A. The saddle stitcher HP sensor does not detect the saddle stitcher unit when the saddle stitcher motor has been driven for 0.48 second. B. The stitching home position sensor does not turn ON when the stitch motor (rear) has been driven backward for 0.5 second.
  • Remedy: A: A-1. The connector of the saddle stitcher HP sensor (S223) or the saddle stitcher motor (M209) are disconnected. A-2. The wiring of the saddle stitcher HP sensor/the saddle stitcher motor are faulty. A-3. The saddle stitcher HP sensor is faulty. A-4. The saddle stitcher motor is faulty. A-5. The saddle stitcher controller PCB is faulty. A-6. The finisher controller PCB is faulty. B: B-1. The stitcher home position sensor (rear) (SW5) is faulty. B-2. The stitcher (rear) is faulty. B-3. The saddle stitcher controller PCB is faulty.
  • Code: E5F4-8002
  • Description: A. Error in the saddle stitcher motor (Finisher-K1) B. Stitcher (rear) home position error (Finisher-L1). A. The saddle stitcher unit does not come off the saddle stitcher HP sensor when the saddle stitcher motor has been driven for 0.48 second. B. The stitching home position sensor does not turn OFF when the stitch motor (rear) has been driven forward for 0.5 second.
  • Remedy: A: A-1. The connector of the saddle stitcher HP sensor (S223) or the saddle stitcher motor (M209) are disconnected. A-2. The wiring of the saddle stitcher HP sensor/the saddle stitcher motor are faulty. A-3. The saddle stitcher HP sensor is faulty. A-4. The saddle stitcher motor is faulty. A-5. The saddle stitcher controller PCB is faulty. A-6. The finisher controller PCB is faulty. B: B-1. The stitcher home position sensor (rear) (SW5) is faulty. B-2. The stitcher (rear) is faulty. B-3. The saddle stitcher controller PCB is faulty.
  • Code: E5F5-8001
  • Description: A. Error in the saddle trailing edge retainer motor (Finisher-K1) B. Stitcher (front) home position error (Finisher-L1). A. The saddle trailing edge retainer move HP sensor does not detect the saddle trailing edge retainer when the saddle trailing edge retainer has been moved for 96 mm by saddle trailing edge retainer motor. B. The stitching home position sensor does not turn ON when the stitch motor (front) has been driven forward for 0.5 second.
  • Remedy: A: A-1. The connector of the saddle trailing edge retainer move HP sensor (S219) or the saddle trailing edge retainer motor (M210) are disconnected. A-2. The wiring of the saddle trailing edge retainer move HP sensor/the saddle trailing edge retainer motor are faulty. A-3. The saddle trailing edge retainer move HP sensor is faulty. A-4. The saddle trailing edge retainer motor is faulty. A-5. The saddle stitcher controller PCB is faulty. A-6. The finisher controller PCB is faulty. B: B-1. The stitcher home position sensor (front) (SW7) is faulty. B-2. The stitcher (front) is faulty. B-3. The saddle stitcher controller PCB is faulty.
  • Code: E5F5-8002
  • Description: A. Error in the saddle trailing edge retainer motor (Finisher-K1) B. Stitcher (front) home position error (Finisher-L1). A. The saddle trailing edge retainer does not come off the saddle trailing edge retainer move HP sensor when the saddle trailing edge retainer motor has been driven for 50 pulses. B. The stitching home position sensor does not turn OFF when the stitch motor (front) has been driven backward for 0.5 second.
  • Remedy: A: A-1. The connector of the saddle trailing edge retainer move HP sensor (S219) or the saddle trailing edge retainer motor (M210) are disconnected. A-2. The wiring of the saddle trailing edge retainer move HP sensor/the saddle trailing edge retainer motor are faulty. A-3. The saddle trailing edge retainer move HP sensor is faulty. A-4. The saddle trailing edge retainer motor is faulty. A-5. The saddle stitcher controller PCB is faulty. A-6. The finisher controller PCB is faulty. B: B-1. The stitcher home position sensor (front) (SW7) is faulty. B-2. The stitcher (front) is faulty. B-3. The saddle stitcher controller PCB is faulty.
  • Code: E5F6-8001
  • Description: A. Error in the saddle paper push-on plate motor (Finisher-K1) B. Paper pushing plate home position error (Finisher-L1). A. The saddle paper push-on plate HP sensor does not detect the saddle paper push-on plate when the saddle paper push-on plate motor has been driven for 0.5 second. B. The paper pushing plate home position sensor does not turn ON when the paper pushing plate motor has been driven for 0.5 second.
  • Remedy: A: A-1. The connector of the saddle paper push-on plate HP sensor (S218) or the saddle paper push-on plate motor (M205) are disconnected. A-2. The wiring of the saddle paper push-on plate HP sensor/the saddle paper push-on plate motor are faulty. A-3. The saddle paper push-on plate HP sensor is faulty. A-4. The saddle paper push-on plate motor is faulty. A-5. The saddle stitcher controller PCB is faulty. A-6. The finisher controller PCB is faulty. B: B-1. The paper pushing plate home position sensor (PI14), paper pushing plate top position sensor (PI15), and paper pushing plate motor clock sensor (PI1) is faulty. B-2. The paper pushing plate drive mechanism is faulty. B-3. The paper pushing plate motor (M8) B-4. The saddle stitcher controller PCB is faulty.
  • Code: E5F6-8002
  • Description: A. Error in the saddle paper push-on plate motor (Finisher-K1) B. Paper pushing plate home position error (Finisher-L1). A. The saddle paper push-on plate does not come off the saddle paper push-on plate HP sensor when the saddle paper push-on plate motor has been driven for 0.15 second. B. The paper pushing plate home position sensor does not turn OFF when the paper pushing plate motor has been driven for 150 msecond.
  • Remedy: A: A-1. The connector of the saddle paper push-on plate HP sensor (S218) or the saddle paper push-on plate motor (M205) are disconnected. A-2. The wiring of the saddle paper push-on plate HP sensor/the saddle paper push-on plate motor are faulty. A-3. The saddle paper push-on plate HP sensor is faulty. A-4. The saddle paper push-on plate motor is faulty. A-5. The saddle stitcher controller PCB is faulty. A-6. The finisher controller PCB is faulty. B: B-1. The paper pushing plate home position sensor (PI14), paper pushing plate top position sensor (PI15), and paper pushing plate motor clock sensor (PI1) is faulty. B-2. The paper pushing plate drive mechanism is faulty. B-3. The paper pushing plate motor (M8) B-4. The saddle stitcher controller PCB is faulty.
‹ First  < 53 54 55 56 57 58 59 >  Last ›
Thêm vào giỏ hàng thành công
popup

Số lượng:

Tổng tiền:

Danh mục