Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C7565i — Trang 31/112

Code: 247-0003-00

Description: System error
Causes: System error
Remedy: Contact to the sales company.

Code: 247-0004-00

Description: System error
Causes: System error
Remedy: Contact to the sales company.

Code: 248-0001-04

Description: EEPROM error
Causes: Reading error was detected when the Main Controller PCB 1 read the Reader backup value in the Reader Controller PCB.
Remedy: Check/replace the Reader Controller PCB (UN1). [Reference] Before replacing the Reader Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMRES

Code: 248-0002-04

Description: EEPROM error
Causes: The Main Controller PCB 1 failed writing of the Reader backup value in the Reader Controller PCB.
Remedy: Check/replace the Reader Controller PCB (UN1). [Reference] Before replacing the Reader Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMRES

Code: 248-0003-04

Description: EEPROM error
Causes: The Main Controller PCB 1 detected an error at inspection after completion of writing of the Reader backup value in the Reader Controller PCB.
Remedy: Check/replace the Reader Controller PCB (UN1). [Reference] Before replacing the Reader Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMRES

Code: 260-0115-05

Description: Power supply error
Causes: The 5 V supply to the Waste Toner Full Sensor was not detected. (Blowout of FU1 on the Pickup Feed Driver PCB)
Remedy: [Related parts] R1.00 - Harness between the Pickup Feed Driver PCB (UN4/J1483) and the Waste Toner Full Sensor (TS9/J8981) - Waste Toner Full Sensor (TS9) - Pickup Feed Driver PCB (UN4) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 260-0131-05

Description: Power supply error
Causes: The 5 V supply to the Multi-purpose Tray Sensor was not detected. (Blowout of FU8 and 9 on the Multi-purpose Tray Pickup Driver PCB)
Remedy: [Related parts] R1.00 - Harness connecting from the Multi-purpose Tray Pickup Driver PCB (UN97/J1359) to the Multipurpose Tray Pickup Sensor and Multi-purpose Tray Trailing Edge Size Sensor (PS129/J8541 and PS130/J8542) - Multi-purpose Tray Pickup Sensor (PS129) - Multi-purpose Tray Trailing Edge Size Sensor (PS130) - Multi-purpose Tray Pickup Driver PCB (UN97) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 260-0151-05

Description: Power supply error
Causes: The 5 V supply to the Registration Sensor was not detected. (Blowout of FU12 on the Fixing Feed Driver PCB)
Remedy: [Related parts] R1.00 - Harness between the Fixing Feed Driver PCB (UN5/J1512) and the Registration Sensor (PS28/ J7211) - Registration Sensor (PS28) - Fixing Feed Driver PCB (UN5) [Remedy] Check/replace the related harness/cable, connector and parts.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie