• Code: 260-0152-05
• Description: Power supply error
• Causes: The 5 V supply to the Sheet Width Sensor was not detected. (Blowout of FU13, 14, 15 and 16 on the Fixing Feed Driver PCB)
• Remedy: [Related parts] R1.00 - Harness connecting from the Fixing Feed Driver PCB (UN5/J1512) to the Sheet Width Sensor 1, 2, 3 and 4 (PS94/J8618, PS95/J8519, PS96/J8520 and PS97/J8621) - Sheet Width Sensor 1, 2, 3 and 4 (PS94, 95, 96 and 97) - Fixing Feed Driver PCB (UN5) [Remedy] Check/replace the related harness/cable, connector and parts.

• Code: 260-0170-05
• Description: Power supply error
• Causes: The 5 V supply to the Decurler Sensor was not detected. (Blowout of FU1 and 11 on the Buffer Driver PCB)
• Remedy: [Related parts] R1.00 - Harness connecting from the Buffer Driver PCB (UN98/J2105) to the Decurler Sensor 1 and 2 (PS85/J7504 and PS86/J7501) - Decurler Sensor 1 and 2 (PS85 and PS86) - Buffer Driver PCB (UN98) [Remedy] Check/replace the related harness/cable, connector and parts.

• Code: 260-0400-05
• Description: Power supply error
• Causes: The 24 V supply to the Fixing Heat Fan was not detected. (Blowout of FU13 on the DC Controller PCB)
• Remedy: [Related parts] R1.00 - Harness between the DC Controller PCB (UN2/J1226) and the Fixing Heat Fan (FM6/J7520) - Fixing Heat Fan (FM6) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

• Code: 260-0420-05
• Description: Power supply error
• Causes: The 24 V supply to the Developing Sleeve Drive Motor was not detected. (Blowout of FU1 and 2 on the Drum Driver PCB)
• Remedy: [Related parts] R1.00 - Harness connecting from the Drum Driver PCB (UN6/J1910) to the Developing Sleeve Drive Motor (Y, M and C) (M20/J7535, M22/J7536 and M24/J7537) - Developing Sleeve Drive Motor (Y, M and C) (M20, M22 and M24) - Drum Driver PCB (UN6) [Remedy] Check/replace the related harness/cable, connector and parts.

• Code: 260-0423-05
• Description: Power supply error
• Causes: The 24 V supply to the 3.5K Deck was not detected. (Blowout of FU23 on the Drum Driver PCB)
• Remedy: [Related parts] R1.00 - Harness between the Drum Driver PCB (UN6/J1920) and the 3.5K Deck Lattice (J7515C) - 3.5K Deck - Drum Driver PCB (UN6) [Remedy] Check/replace the related harness/cable, connector and parts.

• Code: 260-0430-05
• Description: Power supply error
• Causes: The 24 V supply to the drive motor was not detected. (Blowout of FU2 on the Multi-purpose Tray Pickup Driver PCB)
• Remedy: [Related parts] R1.00 - Harness connecting from the Multi-purpose Tray Pickup Driver PCB (UN97/J1351) to the Developing Sleeve Drive Motor (Bk) and Drum Cleaning and Waste Toner Feed Drive Motor (M18/ J7538 and M30/J7539) - Developing Sleeve Drive Motor (Bk) (M18) - Drum Cleaning and Waste Toner Feed Drive Motor (M30) - Multi-purpose Tray Pickup Driver PCB (UN97) [Remedy] Check/replace the related harness/cable, connector and parts.

• Code: 260-0433-05
• Description: Power supply error
• Causes: The 24 V supply to the solenoid or Pre-exposure LED (Bk) was not detected. (Blowout of FU7 and 22 on the Multi-purpose Tray Pickup Driver PCB)
• Remedy: [Related parts] R1.00 - Harness connecting from the Multi-purpose Tray Pickup Driver PCB (UN97/J1354) to the Registration Patch Shutter Solenoid and Cleaning Pre-exposure LED (Bk) (SL1/J7028 and LED1/ J7026) - Registration Patch Shutter Solenoid (SL1) - Cleaning Pre-exposure LED (Bk) (LED1) - Multi-purpose Tray Pickup Driver PCB (UN97) [Remedy] Check/replace the related harness/cable, connector and parts.

• Code: 260-0435-05
• Description: Power supply error
• Causes: The 24 V supply to the Potential Control PCB was not detected. (Blowout of FU21 on the Multipurpose Tray Pickup Driver PCB)
• Remedy: [Related parts] R1.00 - Harness between the Multi-purpose Tray Pickup Driver PCB (UN97/J1355) and the Potential Control PCB (UN29/J3530) - Potential Control PCB (UN29) - Multi-purpose Tray Pickup Driver PCB (UN97) [Remedy] Check/replace the related harness/cable, connector and parts.