Description: Upper limit error with Puncher Side Registration Sensor (B5R) (Puncher Unit-BE1/BF1/BG1/ BH1)
Causes: The light-receiving voltage (PTR5) was 2.5V or less despite increase in sensor light-emission (LED5).
Remedy: [Related parts] - Puncher Side Registration Sensor (PCB3/PCB4) - Puncher Driver PCB (PCB1) - Finisher Controller PCB (PBA101) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] When replacing the Finisher Controller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual.
Description: Lower limit error with Puncher Side Registration Sensor (B5R) (Puncher Unit-BE1/BF1/BG1/ BH1)
Causes: The light-receiving voltage (PTR5) was 2.0V or more despite decrease in sensor light-emission (LED5).
Remedy: [Related parts] - Puncher Side Registration Sensor (PCB3/PCB4) - Puncher Driver PCB (PCB1) - Finisher Controller PCB (PBA101) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] When replacing the Finisher Controller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual.
Description: Upper limit error with Puncher Side Registration Sensor (A4R) (Puncher Unit-BE1/BF1/BG1/ BH1)
Causes: The light-receiving voltage (PTR1) was 2.5V or less despite increase in sensor light-emission (LED1).
Remedy: [Related parts] - Puncher Side Registration Sensor (PCB3/PCB4) - Puncher Driver PCB (PCB1) - Finisher Controller PCB (PBA101) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] When replacing the Finisher Controller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual.
Description: Lower limit error with Puncher Side Registration Sensor (A4R) (Puncher Unit-BE1/BF1/BG1/ BH1)
Causes: The light-receiving voltage (PTR1) was 2.0V or more despite decrease in sensor light-emission (LED1).
Remedy: [Related parts] - Puncher Side Registration Sensor (PCB3/PCB4) - Puncher Driver PCB (PCB1) - Finisher Controller PCB (PBA101) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] When replacing the Finisher Controller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual.
Description: Upper limit error with Puncher Side Registration Sensor (B4) (Puncher Unit-BE1/BF1/BG1/ BH1)
Causes: The light-receiving voltage (PTR2) was 2.5V or less despite increase in sensor light-emission (LED2).
Remedy: [Related parts] - Puncher Side Registration Sensor (PCB3/PCB4) - Puncher Driver PCB (PCB1) - Finisher Controller PCB (PBA101) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] When replacing the Finisher Controller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual.
Description: Lower limit error with Puncher Side Registration Sensor (B4) (Puncher Unit-BE1/BF1/BG1/ BH1)
Causes: The light-receiving voltage (PTR2) was 2.0V or more despite decrease in sensor light-emission (LED2).
Remedy: [Related parts] - Puncher Side Registration Sensor (PCB3/PCB4) - Puncher Driver PCB (PCB1) - Finisher Controller PCB (PBA101) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] When replacing the Finisher Controller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual.
Description: Upper limit error with Puncher Side Registration Sensor (LDR) (Puncher Unit-BE1/BF1/BG1/ BH1)
Causes: The light-receiving voltage (PTR3) was 2.5V or less despite increase in sensor light-emission (LED3).
Remedy: [Related parts] - Puncher Side Registration Sensor (PCB3/PCB4) - Puncher Driver PCB (PCB1) - Finisher Controller PCB (PBA101) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] When replacing the Finisher Controller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual.
Description: Lower limit error with Puncher Side Registration Sensor (11"X17") (Puncher Unit-BE1/BF1/ BG1/BH1)
Causes: The light-receiving voltage (PTR3) was 2.0V or more despite decrease in sensor light-emission (LED3).
Remedy: [Related parts] - Puncher Side Registration Sensor (PCB3/PCB4) - Puncher Driver PCB (PCB1) - Finisher Controller PCB (PBA101) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] When replacing the Finisher Controller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.