• Code: 5AA-8001-02
• Description: Error in the Cutter Motor (Inner Booklet Trimmer-A1)
• Causes: The home position of the trimming blade is not detected when the Cutter Motor has been driven for 5 seconds.
• Remedy: [Related parts] - Harnesses from the Cutter Motor Clock Sensor (S108) to the Trimmer Controller PCB - Harnesses from the Cutter Motor (M106) to the Trimmer Controller PCB - Cutter Motor Clock Sensor (S108) - Cutter Motor (M106) - Trimmer Controller PCB (PCB1) [Remedy] Check/replace the related harness/cable, connector and parts.

• Code: 5AA-8002-02
• Description: Error in the Cutter Motor (Inner Booklet Trimmer-A1)
• Causes: The Cutter Motor Clock Sensor does not come off the home position of the trimming blade when the Cutter Motor has been driven for 500 msec.
• Remedy: [Related parts] - Harnesses from the Cutter Motor Clock Sensor (S108) to the Trimmer Controller PCB - Harnesses from the Cutter Motor (M106) to the Trimmer Controller PCB - Cutter Motor Clock Sensor (S108) - Cutter Motor (M106) - Trimmer Controller PCB (PCB1) [Remedy] Check/replace the related harness/cable, connector and parts.

• Code: 5AA-8003-02
• Description: Cutter Motor Clock Error (Inner Booklet Trimmer-A1)
• Causes: The Cutter Motor Clock Sensor does not detect the Motor clock when the Cutter Motor has been driven for 625 msec.
• Remedy: [Related parts] - Harnesses from the Cutter Motor Clock Sensor (S108) to the Trimmer Controller PCB - Harnesses from the Cutter Motor (M106) to the Trimmer Controller PCB - Cutter Motor Clock Sensor (S108) - Cutter Motor (M106) - Trimmer Controller PCB (PCB1) [Remedy] Check/replace the related harness/cable, connector and parts.

• Code: 5AE-8000-02
• Description: Trimmer Stationary Paper Error (Inner Booklet Trimmer-A1)
• Causes: The Inlet Sensor detects the stationary paper after performing the paper delivery operation.
• Remedy: [Related parts] - Harnesses from the Inlet Sensor (S101) to the Trimmer Controller PCB - Inlet Sensor (S101) is faulty. - Trimmer Controller PCB (PCB1) [Remedy] - If the paper has jammed in the Trimmer, remove it. - Check/replace the related harness/cable, connector and parts.

• Code: 5BA-8001-02
• Description: Error in the Front Estrangement Motor (Inner Booklet Trimmer-A1)
• Causes: The Front Estrangement Motor HP Sensor does not turn ON when the Front Estrangement Motor has been driven for 191msec.
• Remedy: [Related parts] - Harnesses from the Front Estrangement Motor HP Sensor (S102) to the Trimmer Controller PCB - Harnesses from the Front Estrangement Motor (M103) to the Trimmer Controller PCB - Front Estrangement Motor HP Sensor (S102) - Front Estrangement Motor (M103) - Trimmer Controller PCB (PCB1) [Remedy] Check/replace the related harness/cable, connector and parts.

• Code: 5BA-8002-02
• Description: Error in the Front Estrangement Motor (Inner Booklet Trimmer-A1)
• Causes: The Front Estrangement Motor HP Sensor does not turn OFF when the Front Estrangement Motor has been driven for 724 msec. after the Front Estrangement Motor HP Sensor has turned ON.
• Remedy: [Related parts] - Harnesses from the Front Estrangement Motor HP Sensor (S102) to the Trimmer Controller PCB - Harnesses from the Front Estrangement Motor (M103) to the Trimmer Controller PCB - Front Estrangement Motor HP Sensor (S102) - Front Estrangement Motor (M103) - Trimmer Controller PCB (PCB1) [Remedy] Check/replace the related harness/cable, connector and parts.

• Code: 5BA-8011-02
• Description: Error in the Rear Estrangement Motor (Inner Booklet Trimmer-A1)
• Causes: The Rear Estrangement Motor HP Sensor does not turn ON when the Rear Estrangement Motor has been driven for 180 msec.
• Remedy: [Related parts] - Harnesses from the Rear Estrangement Motor HP Sensor (S104) to the Trimmer Controller PCB - Harnesses from the Rear Estrangement Motor (M104) to the Trimmer Controller PCB - Rear Estrangement Motor HP Sensor (S104) - Rear Estrangement Motor (M104) - Trimmer Controller PCB (PCB1) [Remedy] Check/replace the related harness/cable, connector and parts.

• Code: 5BA-8012-02
• Description: Error in the Rear Estrangement Motor (Inner Booklet Trimmer-A1)
• Causes: The Rear Estrangement Motor HP Sensor does not turn OFF when the Rear Estrangement Motor has been driven for 537 msec.
• Remedy: [Related parts] - Harnesses from the Rear Estrangement Motor HP Sensor (S104) to the Trimmer Controller PCB - Harnesses from the Rear Estrangement Motor (M104) to the Trimmer Controller PCB - Rear Estrangement Motor HP Sensor (S104) - Rear Estrangement Motor (M104) - Trimmer Controller PCB (PCB1) [Remedy] Check/replace the related harness/cable, connector and parts.